PDA

View Full Version : Front Derailleur Clamp Torque on HSG Carbon


jameswelle
03-05-2009, 06:11 PM
Hello,

Can anybody tell me what the maximum allowed torque on the front derailleur clamp on a Serotta HSG Carbon is?

The clamp I am using is a Shimano.

Thanks.

fierte_poser
03-05-2009, 07:28 PM
look here:

http://www.serotta.com/owners/frame_care.html

jameswelle
03-06-2009, 10:29 AM
Thanks!

Can you tell me what the acronyms ST, CS, and DKS stand for?

Are any of those for attaching the brake calipers to the frame?

http://www.serotta.com/images/torque_chart.jpg

ald
03-06-2009, 12:11 PM
Thanks!

Can you tell me what the acronyms ST, CS, and DKS stand for?

Are any of those for attaching the brake calipers to the frame?

http://www.serotta.com/images/torque_chart.jpg

ST= pivot bearing at junction of carbon seat stay and chainstay: eg certain versions of Legend Ti and Ottrott

CS = junction of carbon seat stay and chainstay with no pivot: eg CDA, Fierte etc.

DKS = David Kirk Suspension? (System?) (Super bendy stay?) Junction of Ti seat and chain stays on Hors Categorie model

jameswelle
03-06-2009, 08:44 PM
Are there any recommended torques for attaching the brake calipers to the frame or the rear derailleur to the derailleur hanger?

basso1
03-06-2009, 10:56 PM
Torque for Campy is 10 nm for the brake to the frame. 15 nm for rear derailleur to frame.