PDA

View Full Version : Independant Fab. Crown Jewel Complete


wrestlr
11-15-2007, 09:06 AM
Although I have tried to ride this bike for a while, I have come to the conclusion that it is too big for me and no I am not going to grow any more. So, I am now offering up my IF Crown Jewel for sale. My LBS measured it out to be a size 58cm, which is much larger that what I can ride. The frame and fork are steel 853 tubing. Bike is built up with ultegra 9 speed with the exception of the rear der. which is a sachs new success. Stem and seatpost is syncros. Rims are mavic and are a light blue to match the frame. Does not come with a seat but I will throw in some new light blue bar tape that matches. I am thinking 950.00 to the US as pictured. Let me know if you think this is reasonable for such a bike.
-Mike

wrestlr
11-16-2007, 06:41 PM
Okay so I just got back from the lbs and had the IF measured out.

top tube center to center: 59
effective top tube: 60
crank toptube to center: 59
chainstay: 39
headtube: 16


Also stem is 120mm, seatpost is a 27.2mm, and the cranks are 175mm. Sorry about the post saying it was a 58cm as I know these measurements may now rule it out to some who were interested. Also I just wrapped the bars with blue bartape to match the frame. Thanks.
-Mike

Liberace
11-16-2007, 08:54 PM
What's the serial number?

kenw
11-17-2007, 02:06 PM
Hard to tell. And, the year? And, standover height?

Thanks. KenW

wrestlr
11-18-2007, 08:51 PM
I took some better pics and up it went on ebay.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320184716236&ssPageName=ADME:L:LCA:US:1123

bluekudu
11-18-2007, 10:02 PM
as in this post?

http://forums.thepaceline.net/showthread.php?t=33304

wrestlr
11-19-2007, 06:01 AM
Sold. Thanks to those who inquired.