Benjamin
07-17-2004, 03:09 PM
1" threaded F-1 carbon fork with 531 tube.
225mm of steer tube, about 33mm are threaded. came off a 59cm frame.
the color is silver (not sure if it's "platinum" or "quicksilver", if you're going by the serotta colors, though) - please view the attached to see it mounted on my bike.
condition is exceptionally clean except for a few marks around the brake mount and (i will attempt to describe this well...) on the underside of the bridge/crown area, where the wheel passes through, a small area of the paint is worn away and the carbon is visible for a few mm on the back edge (from getting pelted with grit from the tire).
as it's on the underside of the crown, it's not visible when the fork is installed. my mechanic says it's cosmetic and structurally sound and the fork has many, many miles left in it.
amazingly comfortable fork.
make me an offer!
225mm of steer tube, about 33mm are threaded. came off a 59cm frame.
the color is silver (not sure if it's "platinum" or "quicksilver", if you're going by the serotta colors, though) - please view the attached to see it mounted on my bike.
condition is exceptionally clean except for a few marks around the brake mount and (i will attempt to describe this well...) on the underside of the bridge/crown area, where the wheel passes through, a small area of the paint is worn away and the carbon is visible for a few mm on the back edge (from getting pelted with grit from the tire).
as it's on the underside of the crown, it's not visible when the fork is installed. my mechanic says it's cosmetic and structurally sound and the fork has many, many miles left in it.
amazingly comfortable fork.
make me an offer!