Need info on a Bottom Bracket for a Serotta Ti Track

[idtechniques]

I have a Serotta Ti track frame and I need help to the type of configurations/combinations that are supported .


I had a Phil Wood Ti Track bottom bracket installed with a set of Campy C-Rec Pista cranks and the spider on once side and the non-drive side where like 1.5mm from hitting the frame. I tried a another set of of Campy C-Rec Pista cranks same thing.

I went and bought a Campy Mirage 115mm BB and seems to work ok but this BB weights more than the whole bike.

So what configurations have people used with different makers of track cranks. I am open to buying a different set of cranks at this point.

Thank you,
David

[Fixed]

bro if it's for road leave it alone if it 's for the track 11.4 will know
cheers
try here http://www.66fixed.com/


sorry

[11.4]

Here's all the info you might need:

http://www.businesscycles.com/tr-refspec.htm#b/b

What isn't mentioned necessarily is that for Dura Ace you can use an Octalink English bottom bracket in any version -- track Dura Ace, road 7700 Dura Ace, Ultegra 6500 road (double), etc.

Any other info you need, either John at Business Cycles can help you or follow up on this thread.