pcb
02-15-2021, 05:41 PM
FS: NOS Trek Ion CX Pro Tapered Carbon/Alloy Canti Fork: $125 shipped conti usa; paypal g&s
Updated with correct model i.d., since I found the labels I had taken off the original box. While looking for something else, natch. So this is a fork for the Trek Ion CX Pro, which was a precursor to the Crockett. Dropped the price a bit since the fork, though NOS, is a little older than I first thought.
Apologies for the mis-identification, this was advertised as a Crockett fork when I bought it.
Carbon blades, QR drops, aluminum tapered 1.125-1.5" steerer, canti mounts, labeled "700c-45." Includes a crown-mount cable stop w/tension adjuster, threaded fender mount eyelets, and small grub screws to fill the eyelet threads in the blades if you don't use fenders.
I mistakenly got this fork as a backup, mistakenly because my tapered frame has discs and my canti frame isn't tapered. So it's a mis-match either way. It'll fit the disc frame, but it was a stupid move all around.
Coupla pix attached, plus more on the 1st/2nd page of this flickr album:
https://flic.kr/s/aHsk4hRDyg
https://live.staticflickr.com/65535/50930101702_1e72374bcf_b.jpg
https://live.staticflickr.com/65535/50929290563_cf65c4468d_b.jpg
https://live.staticflickr.com/65535/50929290098_b048b16ec2_b.jpg
Updated with correct model i.d., since I found the labels I had taken off the original box. While looking for something else, natch. So this is a fork for the Trek Ion CX Pro, which was a precursor to the Crockett. Dropped the price a bit since the fork, though NOS, is a little older than I first thought.
Apologies for the mis-identification, this was advertised as a Crockett fork when I bought it.
Carbon blades, QR drops, aluminum tapered 1.125-1.5" steerer, canti mounts, labeled "700c-45." Includes a crown-mount cable stop w/tension adjuster, threaded fender mount eyelets, and small grub screws to fill the eyelet threads in the blades if you don't use fenders.
I mistakenly got this fork as a backup, mistakenly because my tapered frame has discs and my canti frame isn't tapered. So it's a mis-match either way. It'll fit the disc frame, but it was a stupid move all around.
Coupla pix attached, plus more on the 1st/2nd page of this flickr album:
https://flic.kr/s/aHsk4hRDyg
https://live.staticflickr.com/65535/50930101702_1e72374bcf_b.jpg
https://live.staticflickr.com/65535/50929290563_cf65c4468d_b.jpg
https://live.staticflickr.com/65535/50929290098_b048b16ec2_b.jpg