Veloce 10 FD shifting Alba 48/32 crank?

[Gsinill]

Does this work or is 32 too small?

Thanks!

[donevwil]

It will work fine. I've got 2 bikes with 48/32 and both have Campy 10 FDs. Adjustment may be more challenging or limiting if it's a braze-on, however.

Sent from my SM-A505U using Tapatalk

[Gsinill]

It will work fine. I've got 2 bikes with 48/32 and both have Campy 10 FDs. Adjustment may be more challenging or limiting if it's a braze-on, however.

Sent from my SM-A505U using Tapatalk

Perfect, thank you!

[Ralph]

Veloce works about the same as all the other Campy groups.

[oliver1850]

There were 4 cage styles made: STD, CT, STD/CT, and triple. I'd expect them all to work, but the triple might work best for the shift to the big ring. I can send you one if you want to try it.

[donevwil]

There were 4 cage styles made: STD, CT, STD/CT, and triple. I'd expect them all to work, but the triple might work best for the shift to the big ring. I can send you one if you want to try it.

CTs are my favorite if you can find them. They work very well with sub-compacts.

[oliver1850]

I haven't used a CT with a ring smaller than 34, so couldn't guess as to function in that case. Always thought that the CT FDs were a better match for 34/48-50 cranks than the later STD/CT FDs, which were a cost reduction rather than performance driven development in my view. Not to knock them, they work fine.

Anyone tried the CT with a 30T small ring?