View Full Version : [VENDOR] Parlee Z1 Custom Handmade Carbon 52cm Dura Ace 14.96 LBS - SOLD

07-27-2019, 01:46 PM
Parlee Z1 - SOLD
Selling a rare, custom built, top of the line Parlee Z1 handmade carbon road bike
Parlee uses ENVE carbon tubing, handwrapped lugging, and titanium bits where it counts - dropouts, bb shell, etc. - on it's flagship Z1. Check out the Parlee site for a video on how they're made right here in the USA.
Hands down one of the best handmade carbon frames on the planet
MSRP would have been well over $10k.
Full Dura Ace 9000 build setup to climb and/or tour with massive 11-30T titanium cassette and top of the line K-Force full compact crankset
Fully custom upright geometry and sky blue to silver fade paint job including on the ENVE 1.0 fork. The original owner's name is under the clearcoat on the seatstays near the rear brake but is hardly noticeable and could easily be painted over or covered by a sticker or something.
Actual weight as it sits is 14.96 Pounds

Build Specs:
Frame: Parlee Z1 Carbon & Titanium
Fork: ENVE 1.0 Carbon w/ full Carbon Steerer, custom painted by Parlee
Headset: Chris King Threadless
Wheels: Dura Ace 9000 Carbon/Alloy Clinchers w/ 9000 hubs (rear rim replaced with a high end alloy hoop)
Tires: Michelin Lithion 23c
Rear Derailleur: Dura Ace 9000 11 Speed
Front Derailleur: Dura Ace 9000 11 Speed / Double w/ Blue KCNC Chain Catcher
Crankset: FSA K-Force Light 11 Speed Carbon 170mm 50/34T
Bottom Bracket: FSA
Cassette: Dura Ace 9000 11 speed Titanium 11-30T 11 Speed
Chain: Dura Ace 9000 11 Speed
Brakes: Dura Ace 9000
Shifters/brake levers: Dura Ace 9000 2x11 Speed Carbon
Handlebar: FSA K-Force Light Carbon 40cm (38cm C-C actual at the hoods)
Stem: NEW Oval 213 Alloy 100mm
Seatpost: KCNC Pro Lite Scandium w/ Offset Clamp
Saddle: NEW Prime Crn/Ti Rails
Bar Tape: NEW Deda Elementi Cork
DOES NOT INCLUDE PEDALS (But I can throw in some plastic flats if you need them)

Size: Custom geometry but most companies would probably call it a 52cm
Seat Tube: 50cm C-C (actual), 54cm C-T (actual), 55cm C-T (effective)
Top Tube: 51cm C-C (actual), 52cm C-C (effective)
Head Tube: 170mm
Standover Height: 78cm
Wheels: 700c
Weight: 14.96 Pounds

Condition Notes:
Preowned in excellent, fully cleaned up, tuned up (with many new parts), and ready to ride condition. The frame and fork are in excellent shape with a few minor cosmetic paint nicks here and there that have been touched up - nothing that gets into the carbon. The wheels have low miles and are spinning smooth and true. Tires have good tread. Drivetrain is excellent. Shifting and braking are crisp and precise. Headset and bottom bracket are smooth. BRAND NEW: Saddle, Bar Tape, and Stem. This bike is ready to roll! SEE PICS

Willing to ship for $100

07-27-2019, 03:35 PM
This is a stupid good deal if it fits you.

07-27-2019, 03:46 PM
This is a stupid good deal if it fits you.No kidding! Wish it were 10cm bigger ;)

Sent from my Pixel 2 XL using Tapatalk

07-28-2019, 03:38 PM
Thanks y'all. Ideal fitment on this would be someone with a little more legs than torso and/or someone that doesn't like to be too stretched out. I don't find "square" frames to be very comfortable with my long inseam (unless I'm really looking for speed) and notice many newer and custom frames moving towards this geometry - sloping TT, taller HT, shorter reach.