Enduro BB tool needed - Can I borrow?

[Elefantino]

Long shot here but …

I bought a frame that came with an Enduro X-15 BB30 BB. No one locally has a tool for it. Enduro says it's proprietary.

If anyone has one (or, better yet, a pair), could I borrow? I'll pay the freight both ways. Just want to get this thing off so I can put on my Praxis and get to Campy-ing.

TIA.

-Mike

[FriarQuade]

I believe that's the Torq Tite tool. We make sockets for it and Enduro makes some tools as well.

[Elefantino]

Yes, I could buy them but I'm cheap :D and just wanted to borrow, as I'm not going to keep the BB.


Sent from my iPhone using Tapatalk

[GonaSovereign]

Is it this one?
https://i.ebayimg.com/images/g/Q50AAOSwxJ9cU5yF/s-l300.jpg

I'm pretty sure I removed one (it was mine, the t47 equivalent with same design), and took it out with my usual Truvative tool that works on most BBs.

Having said that, I'd buy the Abbey tool 10 times out of 10 if I was in the market for one today..

[NHAero]

Does this one from Wheels Mfg work? I have one if so.

https://wheelsmfg.com/presses-tools/bottom-bracket-tools/bb-wrench-48-5mm-44mm.html

[FriarQuade]

Yes, I could buy them but I'm cheap :D and just wanted to borrow, as I'm not going to keep the BB.


Sent from my iPhone using Tapatalk

Then rip it out with a pair of channel locks and call it a day.

[Elefantino]

The flange is flush with the frame and only about 1mm wide. Channel locks would do a number on the carbon. I guess I'll have to buy the TorqTite tools.

[Elefantino]

Is it this one?
https://i.ebayimg.com/images/g/Q50AAOSwxJ9cU5yF/s-l300.jpg

I'm pretty sure I removed one (it was mine, the t47 equivalent with same design), and took it out with my usual Truvative tool that works on most BBs.

Having said that, I'd buy the Abbey tool 10 times out of 10 if I was in the market for one today..
No, unfortunately it's this one. Requires the #*$&% TorqTite tool.