Wtb canti CX frame with straight 44mm headtube ~53-55

[illuminaught]

Any recs or offers?
I have an extra fork and headset... So I'm thinking of just building another bike.

Thanks,

[illuminaught]

Bump. Any suggestions?

[oldpotatoe]

Bump. Any suggestions?

I think the 'issue' is 44mm head tube and 'canti'...44 head tubes were pretty much the stuff of frames with disc brakes..I've never seen one with canti studs. BUT guys like Richard Schwinn can build ya one.

[illuminaught]

Got it. I think that may be the way I have to go.
Thanks,

[jtbadge]

I think the 'issue' is 44mm head tube and 'canti'...44 head tubes were pretty much the stuff of frames with disc brakes..I've never seen one with canti studs. BUT guys like Richard Schwinn can build ya one.



You can certainly find one in the wild, but they are uncommon. Gunnar will build one but by the time you price in that options, you're spending full custom frame money. There were some production frames like the Raleigh that was on clearance a while back, but even those were only made for a year or two.

Most of the big brands went 1.25" lower on their in-house tapered canti forks, it seems like, so those frames probably won't fit.

A couple of Paceline examples:

My Thrive (https://forums.thepaceline.net/showthread.php?t=217377&page=3&highlight=thrive):

https://www.pedalroom.com/p/thrive-cycles-fillet-brazed-allroad-36885_33.jpg

Maximus' Tomii (https://forums.thepaceline.net/showthread.php?t=212651&highlight=tomii) (from eBAUMANN)

https://farm5.staticflickr.com/4489/37917961686_56f7d32688_h.jpg

And eBAUMANN's other Tomii (https://forums.thepaceline.net/showthread.php?t=155885)

https://farm6.staticflickr.com/5584/15138442290_595dde42eb_b.jpg

John Watson of the Radavist had this Geekhouse for a while:

https://farm4.staticflickr.com/3845/14507021667_fe89e8255e_c.jpg (https://flic.kr/p/o6Wh8e)

Paul at Rock Lobster has built this configuration a bunch in steel and aluminum:

https://i.pinimg.com/originals/b3/8e/74/b38e744fe1a281ffd44131877ecdfced.jpg

And if you ask nicely, I wonder if Squid wouldn't weld another one up, they did a run early on of 44mm HT canti frames.

https://www.pedalroom.com/p/squid-bicycles-rattle-can-cx-30th-25366_2.jpg

[Hilltopperny]

I have this if you want to ditch the canti idea?https://uploads.tapatalk-cdn.com/20190227/ebcf8dfec05fcaeafb4acac33ee0ae6f.jpg

Sent from my XT1650 using Tapatalk

[commfire]

I have this Can’t Zanconato in the classifieds

https://forums.thepaceline.net/showthread.php?t=234380&highlight=Zanconato

[jtbadge]

I have this Can’t Zanconato in the classifieds

https://forums.thepaceline.net/showthread.php?t=234380&highlight=Zanconato

So good!

https://forums.thepaceline.net/attachment.php?attachmentid=1697974878&stc=1&d=1550427985