View Full Version : Road/cross crank options for 73mm BB?
jtbadge
10-22-2018, 12:55 AM
Currently looking at buying a Kelly Knobby X, but it has a 73mm bottom bracket shell, which is giving me some pause. I only have experience using more modern 24/30mm spindle road cranks with external bearings, so I am not sure what my options are here.
What are some good options for a 2x crank for 10 speed drivetrain with a 46-50t big ring and 32-36t little ring? I'm sure I could cobble together a square taper BB/crank arm/chainring combination, but don't really know where to start.
oldpotatoe
10-22-2018, 08:23 AM
Currently looking at buying a Kelly Knobby X, but it has a 73mm bottom bracket shell, which is giving me some pause. I only have experience using more modern 24/30mm spindle road cranks with external bearings, so I am not sure what my options are here.
What are some good options for a 2x crank for 10 speed drivetrain with a 46-50t big ring and 32-36t little ring? I'm sure I could cobble together a square taper BB/crank arm/chainring combination, but don't really know where to start.
https://blueskycycling.com/products/shimano-fc-cx50-cyclocross-2-x-10-crankset?variant=12497967546461&utm_source=google&utm_medium=cse&utm_term=EFCCX50EX66L&gclid=Cj0KCQjw6rXeBRD3ARIsAD9ni9Cz499tGTR3fjIkmSjq WiqD-At-T3Q7dsunSb8bvKro7CoH70mdYJ8aAgriEALw_wcB
Sparshall
10-22-2018, 08:38 AM
I have a Diamondback Haanjo Exp which has a 73mm threaded B.B. I put a FSA Adventure crank (48/32) with an infinite BB. Works great...just needed to make sure the crankarms cleared the chain stays.
jtbadge
10-22-2018, 08:52 AM
https://blueskycycling.com/products/shimano-fc-cx50-cyclocross-2-x-10-crankset?variant=12497967546461&utm_source=google&utm_medium=cse&utm_term=EFCCX50EX66L&gclid=Cj0KCQjw6rXeBRD3ARIsAD9ni9Cz499tGTR3fjIkmSjq WiqD-At-T3Q7dsunSb8bvKro7CoH70mdYJ8aAgriEALw_wcB
I think that’s a typo? I’ve owned that crank before and there wasn’t room for an extra 5mm on the spindle when installed in a 68mm BB.
jtbadge
10-22-2018, 09:10 AM
I have a Diamondback Haanjo Exp which has a 73mm threaded B.B. I put a FSA Adventure crank (48/32) with an infinite BB. Works great...just needed to make sure the crankarms cleared the chain stays.
That's interesting. I've used another BB386 crank (SRAM Force 22) on a 68mm BB and had to use a bunch of spacers. I wonder if a BB386 crank would clear this frame.
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.