Multitool roundup

[icepick_trotsky]

What's your favorite small multitool for carrying on rides?

I have a crank brothers one I like but it's heavy and has too many items for a lightweight roadie use. I need at least a t25 (for campy calipers) and a few other allens.

Park Tool I-Beam looks like a good option. Others?

[mktng]

Lezyne CRV20.
its not "tiny"
its not heavy.
fits in my tool roll w/ tube and lever.
has everything youd need. ive even had to use the knife on it once.

[AngryScientist]

silca italian army knife + little leatherman with pliers etc.

https://instagram.fewr1-1.fna.fbcdn.net/vp/d86e2f22e2291cf6d95b2eeefe8f9b6a/5BC12D8C/t51.2885-15/e35/21909696_365446660552130_1487004663847845888_n.jpg

[Black Dog]

Crank Brothers M19

https://images.duckduckgo.com/iu/?u=http%3A%2F%2Fcdn.mos.bikeradar.imdserve.com%2Fi mages%2Fbikes-and-gear%2Ftools%2Fmulti-tool%2F1315920209622-v4hlp2qt7jmq-1200-80.jpg&f=1

[djg21]

What's your favorite small multitool for carrying on rides?

I have a crank brothers one I like but it's heavy and has too many items for a lightweight roadie use. I need at least a t25 (for campy calipers) and a few other allens.

Park Tool I-Beam looks like a good option. Others?

I like the Park I-beam multi tools. I use an IBT-3 because I need the Torx. https://www.parktool.com/product/i-beam-mini-fold-up-hex-wrench-screwdriver-star-driver-set-IB-2

[spoonrobot]

I use a crankbros M19 as well. I've never found it wanting, has everything I need and a little extra just in case.

[sandyrs]

Another fan of the M19 here, I don't think I could ever care about the weight of a multitool.

[mcteague]

I have a Lezyne RAP-6 that was fine except the 4mm hex seemed just a bit too oversize. I had a tough time getting it to fit most bolts. So, I replaced it with a Topeak Mini 9 which seems fine. It also comes with a nifty little neoprene case.

https://thewirecutter.com/reviews/the-best-multi-tool-for-most-cyclists/

https://www.bikeradar.com/us/gear/category/tools/multi-tool/product/review-topeak-mini-9-multi-tool-15553/
https://images-na.ssl-images-amazon.com/images/I/71EpLXAyIxS._SX425_.jpg

Tim

[tuscanyswe]

I use a crankbros M19 as well. I've never found it wanting, has everything I need and a little extra just in case.


I also have this. Well i have a lot of these tools but its the one i use in my daily backpack.

Its never let me down, well once or twice i needed leverage to hold the chaintool.

[m_sasso]

Bigger fan of the M17 on a road bike smaller, lighter, and no need for a extra Phillips and T10.

On a contemporary Mt bike the T10 might be useful for brake bleeder screws.

M19

chain tool 8/9/10 speed compatible
hex wrenches #2, 2.5, 3, 4, 5, 6, 8
length 89mm
open wrench 8mm, 10mm
screwdrivers Phillips #1, phillips #2, flat #2
spoke wrench #0, 1, 2, 3
torx T-10, t-25
warranty Lifetime
weight 175g

M17

chain tool 8/9/10 speed compatible
hex wrenches #2, 2.5, 3, 4, 5, 6, 8
length 89mm
open wrench 8mm, 10mm
screwdrivers Phillips #2, flat #2
spoke wrench #0, 1, 2, 3
torx T-25
warranty Lifetime
weight 168g

[Tony]

I carry a M19 modified, 1/4 lighter than original.

[Ozz]

crank bros F10...small, never been used.:cool:

hex wrenches #2, 2.5, 3, 4, 5, 6, 8
screwdrivers Phillips #2, flat #1
torx T-25
weight 94g

[YesNdeed]

+1 for the M19, may pick an M17 for a resident road tool.

Bigger fan of the M17 on a road bike smaller, lighter, and no need for a extra Phillips and T10.

On a contemporary Mt bike the T10 might be useful for brake bleeder screws.

M19

chain tool 8/9/10 speed compatible
hex wrenches #2, 2.5, 3, 4, 5, 6, 8
length 89mm
open wrench 8mm, 10mm
screwdrivers Phillips #1, phillips #2, flat #2
spoke wrench #0, 1, 2, 3
torx T-10, t-25
warranty Lifetime
weight 175g

M17

chain tool 8/9/10 speed compatible
hex wrenches #2, 2.5, 3, 4, 5, 6, 8
length 89mm
open wrench 8mm, 10mm
screwdrivers Phillips #2, flat #2
spoke wrench #0, 1, 2, 3
torx T-25
warranty Lifetime
weight 168g

[Seamus]

If you are a minimalist/weight-weenie, I use a Specialized EMT Road Pro:
https://www.specialized.com/us/en/emt-pro-road-tool/p/131204?color=235028-131204

2/4/5/6 Hex
T25; Philips Head
65grams

I’m sure my chain is going to snap tomorrow now that I’ve posted this.

[Louis]

CPR-9

I don't think they're in production anymore.

http://www.bikepro.com/products/chains/chains_jpg/y_cpr_9.jpg

[Likes2ridefar]

If you are a minimalist/weight-weenie, I use a Specialized EMT Road Pro:
https://www.specialized.com/us/en/emt-pro-road-tool/p/131204?color=235028-131204

2/4/5/6 Hex
T25; Philips Head
65grams

I’m sure my chain is going to snap tomorrow now that I’ve posted this.

Perfect for my needs, too.

[Black Dog]

7 Grams....;)

Bigger fan of the M17 on a road bike smaller, lighter, and no need for a extra Phillips and T10.

On a contemporary Mt bike the T10 might be useful for brake bleeder screws.

M19

chain tool 8/9/10 speed compatible
hex wrenches #2, 2.5, 3, 4, 5, 6, 8
length 89mm
open wrench 8mm, 10mm
screwdrivers Phillips #1, phillips #2, flat #2
spoke wrench #0, 1, 2, 3
torx T-10, t-25
warranty Lifetime
weight 175g

M17

chain tool 8/9/10 speed compatible
hex wrenches #2, 2.5, 3, 4, 5, 6, 8
length 89mm
open wrench 8mm, 10mm
screwdrivers Phillips #2, flat #2
spoke wrench #0, 1, 2, 3
torx T-25
warranty Lifetime
weight 168g

[joosttx]

https://farm2.staticflickr.com/1743/41942486924_039786b6b2.jpg

https://farm2.staticflickr.com/1743/41942778054_de99a75524_b.jpg

Spurcycles: 2mm, 2.5, 3, 4, 5, 6, 8, T10, T25, P2
Made in the USA
90 grams but you can remove the bits you dont like as well as the bag.
I add a mineral design chaintool to the mix.

Here is the whole set up.

https://farm2.staticflickr.com/1722/42610795192_cb7a0c4ba4_b.jpg

[fogrider]

Crank Brothers M19

https://images.duckduckgo.com/iu/?u=http%3A%2F%2Fcdn.mos.bikeradar.imdserve.com%2Fi mages%2Fbikes-and-gear%2Ftools%2Fmulti-tool%2F1315920209622-v4hlp2qt7jmq-1200-80.jpg&f=1

what more do you need?

[weisan]

Other than the spare tube and tire levers that go into the saddle bag, I carry these with me in the back pocket at all times in every ride.

https://cdn7.bigcommerce.com/s-ox79uhj/images/stencil/1280x1280/products/38479/97682/Capture__00770.1503695291.JPG?c=2&imbypass=on

https://images-na.ssl-images-amazon.com/images/I/41cLYgwX4PL._SX355_.jpg

https://tribkcpq.files.wordpress.com/2016/03/costco-citi-visa.jpg?quality=85&strip=all&w=499

Extra batteries for my on-board camera
https://sep.yimg.com/ay/semsons-inc/p11p15-04-n02-replacement-battery-for-garmin-garmin-virb-virb-elite-montana-600-13.jpg

A piece of shop towel cut smaller

https://images-na.ssl-images-amazon.com/images/I/51y8uBbS07L._SX342_.jpg

Everything packed into a compact size zip block bag.

http://alicehui.com/bike/Parts/IMG_7629.jpg

http://alicehui.com/bike/Parts/IMG_7630.jpg

[AngryScientist]

i've tried various crank bros tools over the years, and have never had a tool rust faster than those, maybe they've improved their surface treatment since years past, but they used to be pretty bad in that department, in my experience.

i'd also caution against tools that use mini bits like the one joostx posted above. i had one i really liked, right up until i dropped my 5mm bit in a muddy gravel road while fiddling with a seatpost. funny how gravel is like camouflage when looking for a small metal bit. never did find it.

[weisan]

I agree with angry pal in the mini bit part. That's why I am not keen on that extension size up bit on the Silca tool that I have.

[chiasticon]

I like the Park MT-1 for summer rides. just has the basic necessities on it and weighs nothing. for off-road riding (MTB or CX) and winter, I pack a Lezyne SV10 and a quick link. more likely to break stuff off-road and I really don't want to be stranded in winter (summer either, but it's less life-threatening usually).

[oldpotatoe]

This, spare tire, $10(in spare tire, rolled up), cellie..road rides only. Needed something else only once in 30 some years(SP cleat came loose).

[joosttx]

i'd also caution against tools that use mini bits like the one joostx posted above. i had one i really liked, right up until i dropped my 5mm bit in a muddy gravel road while fiddling with a seatpost. funny how gravel is like camouflage when looking for a small metal bit. never did find it.

Dont knock it til you try it. That PB Swiss multitool was a POS in design compared to this one. The bits were hard to get out and handle. The spur tool is much easier to use. I am sold on it. The lost bit fear is not an issue with me any more,

[jemoryl]

Birzman has some well made multitools, including some with built in torque keys. I take this little one with me: http://www.birzman.com/products_2.php?uID=2&cID=29&Key=36

[Bob Ross]

I'm currently carrying a Crank Bros. M19 in one saddlebag, and some Specialized equivalent in the other. I got those because I was tired of carrying a separate chainbreaker, but I was going on a lot of group rides where someone always needed one!

But my favorite multitool is actually the Topeak X-Tool (https://www.topeak.com/global/en/products/mini-tools/176-x-tool). Its narrower body allows me to adjust bolts that are close to some unmoving object without having to constantly remove & reinsert the tool from the hex head, the way I do w/ the wider Crank Bros. or Specialized.

[unterhausen]

I recently did an inventory of my randonneuring bike and I had two multitools. They can be heavy, that wasn't a great idea.

I recently helped someone put their rear derailleur jockey wheel back together beside a road, in the rain. The multitool hex keys are really short, and it was a pain in the butt. I have considered carrying a few select full-size hex keys since then. I'm wondering if the Fix It Sticks might be worth carrying https://store.fixitsticks.com/collections/mountain/products/fix-it-sticks-replaceable-edition?variant=21124474497

[deechee]

https://farm2.staticflickr.com/1722/42610795192_cb7a0c4ba4_b.jpg

Have you used that Tubolito tube yet? I'm curious.

[Black Dog]

i've tried various crank bros tools over the years, and have never had a tool rust faster than those, maybe they've improved their surface treatment since years past, but they used to be pretty bad in that department, in my experience.

i'd also caution against tools that use mini bits like the one joostx posted above. i had one i really liked, right up until i dropped my 5mm bit in a muddy gravel road while fiddling with a seatpost. funny how gravel is like camouflage when looking for a small metal bit. never did find it.

True, I keep mine in a plastic bag. Any moisture = rust with them. Great tool otherwise and worth the mini hassle of a small plastic bag.

[joosttx]

Have you used that Tubolito tube yet? I'm curious.

no. they are too expensive just to test, :) .

After adding dynaplug to my tools, I dont think I have needed a tube. Hopefully I will never need to use the tube.

[R3awak3n]

trying a new tool out

https://www.amazon.com/Pro-Bike-Tool-Mini-Ratchet/dp/B074JV8XJT/ref=sr_1_28?ie=UTF8&qid=1528480658&sr=8-28&keywords=bike+tool


got this guy on Amazon (but I am not sure why its now $25, I bought it for $15). It is actually pretty nice except, the bits are not long enough to tighten my RD which is a bit annoying. Apart from that it is actually nice. Replacing my fix it sticks since they are all rusty.

[joosttx]

This is what I bought for my incoming mountain bike, the I9 Matchstix. All the tools including a chain break hidden inside your front thru axle.

https://farm2.staticflickr.com/1754/27808316047_3e5510f933_b.jpg

https://farm2.staticflickr.com/1734/28803754768_763e02d1cc_b.jpg

https://farm2.staticflickr.com/1735/27808315977_69d794cba5_b.jpg

https://farm2.staticflickr.com/1760/28803756808_19dec8579f_b.jpg

https://farm2.staticflickr.com/1722/28803755558_810f1e1544_b.jpg

[R3awak3n]

That is pretty damn cool

[chiasticon]

It is actually pretty nice except, the bits are not long enough to tighten my RD which is a bit annoying.when I installed Chorus on my bike recently, all of the Torx 25 tools I had had too large of a shaft area around the bit to allow it to actually fit inside the RD enough to make purchase on the bolt. I had to use the T25 wrench that Zipp ships with their stems. which has a certain irony in it, given the Sram (aka Zipp) hatred in these parts :p

[zlin]

What tool roll / saddle bag? I'm in the market for a new setup and thinking I might try the spurcycle seat pack.



https://farm2.staticflickr.com/1743/41942486924_039786b6b2.jpg

https://farm2.staticflickr.com/1743/41942778054_de99a75524_b.jpg

Spurcycles: 2mm, 2.5, 3, 4, 5, 6, 8, T10, T25, P2
Made in the USA
90 grams but you can remove the bits you dont like as well as the bag.
I add a mineral design chaintool to the mix.

Here is the whole set up.

https://farm2.staticflickr.com/1722/42610795192_cb7a0c4ba4_b.jpg

[joosttx]

What tool roll / saddle bag? I'm in the market for a new setup and thinking I might try the spurcycle seat pack.

That spur bag looks cool. I am using Velocolour's Dynamite plus tool roll. I am typically not a fan of tool rolls but I really like this one.


http://store.velocolour.com/product/plus-dynamite-roll

https://farm1.staticflickr.com/908/28322196898_12d3328818_b.jpg

[oldpotatoe]

when I installed Chorus on my bike recently, all of the Torx 25 tools I had had too large of a shaft area around the bit to allow it to actually fit inside the RD enough to make purchase on the bolt. I had to use the T25 wrench that Zipp ships with their stems. which has a certain irony in it, given the Sram (aka Zipp) hatred in these parts :p

need new wrenches...:)

[owly]

Have you used that Tubolito tube yet? I'm curious.

Very similar kit to mine, including the Squirt.

I've used the extralight Tubolito after slashing a tyre way out in the boonies. Just make sure you get the correct size.
Does the job well. Two of those in the lightest version are the same weight as a regular tube.

[cadence90]

That spur bag looks cool. I am using Velocolour's Dynamite plus tool roll. I am typically not a fan of tool rolls but I really like this one.
http://store.velocolour.com/product/plus-dynamite-roll
That looks superbly designed, really rational, simple to use, elegant to look at.

Well made and durable too, I would guess?
.

[R3awak3n]

That looks superbly designed, really rational, simple to use, elegant to look at.

Well made and durable too, I would guess?
.

for $130, I would hope so

[mingc]

I carry one of these

https://dbyvw4eroffpi.cloudfront.net/product-media/1C8B/532/532/Fabric-16-in-1-Multi-Tool.jpg

[cadence90]

for $130, I would hope so

Where are you seeing that?

I see:" TUBE & TOOL PLUS DYNAMITE ROLL ($54 USD)" on the link that joosttx posted.
.

[R3awak3n]

Where are you seeing that?

I see:" TUBE & TOOL PLUS DYNAMITE ROLL ($54 USD)" on the link that joosttx posted.
.

https://www.worldwidecyclery.com/products/industry-nine-matchstix-front-thru-axle-multi-tool-for-rockshox-15-x-100mm-forks-includes-chaintool-and-bit-2?gclid=Cj0KCQjwmPPYBRCgARIsALOziAOSPlHRdqkmcBAdg8 awowlSTFd02HVOcfp2THhmEwojRqddFdfOIpAaAgLlEALw_wcB

but it was the first link I clicked

[cadence90]

https://www.worldwidecyclery.com/products/industry-nine-matchstix-front-thru-axle-multi-tool-for-rockshox-15-x-100mm-forks-includes-chaintool-and-bit-2?gclid=Cj0KCQjwmPPYBRCgARIsALOziAOSPlHRdqkmcBAdg8 awowlSTFd02HVOcfp2THhmEwojRqddFdfOIpAaAgLlEALw_wcB

but it was the first link I clicked

Oh that one, yeah. I thought you meant joosttx's Velocolour Dynamite Plus roll.

That I-9 tool seems like a pita to use, way too expensive, complicated, and I don't have T-A anyway. More simple is fine for me.
.

[R3awak3n]

Oh that one, yeah. I thought you meant joosttx's Velocolour Dynamite Plus roll.

That I-9 tool seems like a pita to use, way too expensive, complicated, and I don't have T-A anyway. More simple is fine for me.
.

ahah sorry, I totally missed what you were talking about.

On the velocolour roll, looks very nice but, from having had a lot of saddle rolls (I am not sure why I have had so many), my favorite one is the ILE one, I like that I can get my tools out without have to take the bag out.

[cadence90]

ahah sorry, I totally missed what you were talking about.

On the velocolour roll, looks very nice but, from having had a lot of saddle rolls (I am not sure why I have had so many), my favorite one is the ILE one, I like that I can get my tools out without have to take the bag out.

I'll have to look that ILE one up. Being able to leave the roll/bag attached would be a huge advantage. But then I guess I might just be back at my standard Rixen & Paul or SciCon Klick-Fix bags? The drag on those is the smaller things settle down in the very back/bottom and are hard to extract without un-clipping the bag (which is very fast at least).
.

[Buzz]

This one:

Does pretty much everything and with leverage.

[Asudef]

Have had the Lezyne SV10 for probably close to 6 years now. No issues, never really needed more and pretty much still looks like the day I bought it.

http://i1.wp.com/blog.lezyne.com/wp-content/uploads/2015/11/Roadcc-LezyneSV10tool.jpg?resize=880%2C586

[chrismoustache]

+1 for the Topeak Mini 9. Very compact, but still functional.

The little neoprene sleeve is great. I put it on my belt when doing guide work and it's there in an instant if someone needs a tweak.