PDA

View Full Version : Garmin 520...does not find satellites after update?


Tommasini53
05-06-2018, 10:14 AM
Has this problem occurred for anyone else???

Worked well, performed an update last week...then it would not recognize or find satellites/gps coverage. thus no speed or distance readings. each start up shows a "updating firmware" message. i performed a reset. no change.

I sent an email to Garmin. I'm curious to see what their c.s. is like.

eddief
05-06-2018, 10:16 AM
in my experience the support is terrific.

Has this problem occurred for anyone else???

Worked well, performed an update last week...then it would not recognize or find satellites/gps coverage. thus no speed or distance readings. each start up shows a "updating firmware" message. i performed a reset. no change.

I sent an email to Garmin. I'm curious to see what their c.s. is like.

kramnnim
05-06-2018, 12:38 PM
Their phone support is very good

R3awak3n
05-06-2018, 01:58 PM
try to put it in normal gps mode only (no glonass), then see if you have satellites. If they do appear then put it back on gps+glossnass again and see if it works.