Need some quick bottom bracket install help!

[simplemind]

I have a frame with an English 68mm shell. I am installing an XT crank (https://bike.shimano.com/en-US/product/component/deorext-m8000/FC-M8000-1.html) (1X11) and was told to use an XTR SM-BB93 (https://bike.shimano.com/en-EU/product/component/xtr-m9000/SM-BB93.html) bottom bracket, which is compatible with 68 or 73mm shells.
Included in the package was three spacers, all alike. What would be the correct way to install those spacers to get the correct chainline? I'm guessing two on the drive side and one on the NDS, but I'm clueless. :eek:

[kppolich]

Start on page 11
http://si.shimano.com/pdfs/dm/DM-FC0002-12-ENG.pdf

[simplemind]

Start on page 11
http://si.shimano.com/pdfs/dm/DM-FC0002-12-ENG.pdf

Thank you. I did see that document earlier but became confused on page 11 where it shows "(A) BB mount-type bracket", wth is that (I don't think I have one).

[kppolich]

I would follow this diagram.
https://farm1.staticflickr.com/885/26791536957_334b05fbdd.jpg

or start at 1:45 here:
https://www.youtube.com/watch?v=v5Frlk-kFXc&t=12s

[vqdriver]

Thank you. I did see that document earlier but became confused on page 11 where it shows "(A) BB mount-type bracket", wth is that (I don't think I have one).

i believe that's for bb mounted front deraileurs
if you're using a traditional clamp or braze on fd, it doesn't apply
i did trial and error and ended up 2 ds and 1 nds

[simplemind]

I would follow this diagram.
https://farm1.staticflickr.com/885/26791536957_334b05fbdd.jpg

or start at 1:45 here:
https://www.youtube.com/watch?v=v5Frlk-kFXc&t=12s

Simple enough! thanks!

i believe that's for bb mounted front deraileurs
if you're using a traditional clamp or braze on fd, it doesn't apply
i did trial and error and ended up 2 ds and 1 nds

Ahh, that makes sense, thanks!