View Full Version : 1" threadless headset with shortest stack height?
Gsinill
03-26-2018, 07:22 AM
Title says it all.
Cane Creek ZeroStack looks good but I don't think they make a 1" version.
Thanks!
oldpotatoe
03-26-2018, 07:33 AM
Title says it all.
Cane Creek ZeroStack looks good but I don't think they make a 1" version.
Thanks!
I can't specifically answer your question but a HS for track will probably have the lowest stack height..
tuscanyswe
03-26-2018, 08:34 AM
Regular record is pretty low stack. Like sub 30mm at least. Id guess from memory 26 ? :)
EricEstlund
03-26-2018, 08:54 AM
Star, if you can find one.
Steerer cut too short?
mhespenheide
03-26-2018, 09:50 AM
I have the same question, but it's because I'm shifting to a fork with a little longer axle-to-crown length, so I'm hoping to find a headset with a small lower stack height.
EricEstlund
03-26-2018, 10:00 AM
Same answer, but lower stack is fairly close to standard these days (roughly 12-13mm).
Gsinill
03-26-2018, 10:55 AM
Star, if you can find one.
Steerer cut too short?
Well, got the frame with a Cane Creek S2 installed, which leaves about 36mm of steerer.
Rather than limiting my stem selection, I'd prefer to gain a few mm with another HS - if possible of course.
KarlC
03-26-2018, 11:16 AM
Star, if you can find one.
Steerer cut too short?
Here is a brand new one on ebay .....
https://www.ebay.com/itm/263455401815?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true
EricEstlund
03-26-2018, 11:32 AM
S2's are already pretty low at 14mm.
colker
03-26-2018, 11:56 AM
-17degr. stem and Hbar w/ a lot of drop.
hollowgram5
03-26-2018, 12:00 PM
I bought a 1" Star headset from eBaumann last year and haven't used it. Let me dig a bit and see if I can find it and figure out what I paid for it..
Gsinill
03-26-2018, 12:09 PM
S2's are already pretty low at 14mm.
I think combined it's 26.5mm for top and bottom cups?
Here is a brand new one on ebay .....
https://www.ebay.com/itm/263455401815?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true
Yep, saw that too... Looks like an overall stack height of 19.6mm which would buy me 6mm.
The instructions he included in the picture sound a little scary though:
"This is only for advanced diy'ers or professional bicycle mechanics to install."
Besides installation, I wonder whether there are any other quirks...
Thank for sharing!
EricEstlund
03-26-2018, 03:02 PM
A boat load of small loose ball bearings.
saab2000
03-26-2018, 03:06 PM
Campagnolo is low - lower than Chris King at least. I use them on several bikes and they're exceptional headsets and have a low stack height. They look good to boot.
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.