did WI T11 hubs ever come in 10-sp only?

[AngryScientist]

My recollection was that white industries T11 hubs came out around the time of 11-sp shimano and never came in a 10-sp only freehub? anyone know?

(i just bought a used hub from ebay describes as "10 speed", but i'm hoping it's actually 11)

[Bradford]

I would think the 11 in T11 means 11 speed.

I have a nice matching front to that I could have sent you, but Spud just built it up for me and its on my Club Racer.

[Cicli]

11 speed. Thats what the 11 is. The previous version H2-3 looked better but these are awesome hubs.

[AngryScientist]

thanks guys, that is what i recalled also.

the one i just bought looks a little beat, but it's the silver one, so with some cleaning up, it should come back to life like new.

[bicycletricycle]

10 speed free hubs do fit on them so technically it is possible.

[AngryScientist]

hubber in question...

https://i.ebayimg.com/images/g/7lQAAOSwJLBalxVM/s-l1200.jpg

https://i.ebayimg.com/images/g/deAAAOSwVNNalxVY/s-l1200.jpg

[ergott]

The 10 speed freehubs look a bit different. That's 11 speed.

https://photos.smugmug.com/Cycling/Cycling-shots/i-j7P7nQq/0/797c23d8/L/20180301_211436-L.jpg

[marciero]

My recollection was that white industries T11 hubs came out around the time of 11-sp shimano and never came in a 10-sp only freehub? anyone know?

(i just bought a used hub from ebay describes as "10 speed", but i'm hoping it's actually 11)

I have an excellent condition 32 hole T11 front with very low miles to go with that if you are interested. Would sell cheap- $50?

Also, not what you are asking about but I also remember WI building the MI5 in 130 10-sp configuration upon request. I was running 9-10 and was interested in the greater bracing angle of the 10 vs 11-sp.

[thunderworks]

Simichrome polish will work wonders on the hub shell.