Anyone recently buy a Nashbar threaded carbon fork?

[oliver1850]

Wondering about the ATC. I have one here that I bought a few years ago that I measure at 365 mm. Nashbar's site lists 372.5 mm but it seems unlikely that it's changed. The 30 mm tires I want to use just clear the crown of the fork I have. Another 7.5 mm would give enough clearance for rocks, I think. I probably should order at least one anyway, as they are 25% off this weekend for a $60 net cost (+ tax). Free shipping too.

[Ronsonic]

I bought one of their threadless 1" forks a few months ago. Not sure if it'll help but I could measure for you.

[oliver1850]

I bought one of their threadless 1" forks a few months ago. Not sure if it'll help but I could measure for you.

Might be helpful just to determine if any of their ATC measurements are accurate. ATC on the threadless is listed at 370 mm, but there's also a 1 1/8" version of that one. I think I might have a 1" threadless on hand, so will have to check it too. The straight blade threadless which is only available in 1 1/8" is listed at 372.5 mm.