View Full Version : Barrel adjuster for rear cantilever
icepick_trotsky
03-27-2017, 08:53 AM
I'm about to run cables for a rear cantilever -- Paul neo retro with a moon unit. The frame has a brazed on cable hanger that is not threaded -- it's just a stop the size of a ferrule.
Can you recommend a barrel adjuster for this type of stop? Or should I just use an in line adjuster? Or, just not worry about having an adjuster?
David in Maine
03-27-2017, 09:04 AM
This might work?
http://store.interlocracing.com/irdbaad.html
ColonelJLloyd
03-27-2017, 09:08 AM
If the IRD adjuster above will fit in housing stop that's a nice solution. That said, I've had many cantilever setups without an adjuster. I'm not a big fan of inline adjusters for brakes.
Hindmost
03-27-2017, 10:09 AM
Maybe:
http://www.trpbrakes.com/category.php?productid=1051&catid=190
jtbadge
03-27-2017, 10:10 AM
Alternatively, Hunter Nugz:
http://images.bigcartel.com/product_images/139534618/IMG_5887.jpg?auto=format&fit=max&h=1000&w=1000
hollowgram5
03-27-2017, 10:13 AM
Alternatively, Hunter Nugz:
http://images.bigcartel.com/product_images/139534618/IMG_5887.jpg?auto=format&fit=max&h=1000&w=1000
Only downfall is the Nugz have been discontinued. Rick did a final run of them about a year ago.. there's a set that's been bouncing around on eBay, but that's the only set I've seen in a while (aside from the set I picked up for a project)..
JAGI410
03-27-2017, 12:00 PM
Hunter mentioned on an instagram post that more Nugz are coming!
ColonelJLloyd
04-07-2017, 02:44 PM
Hunter mentioned on an instagram post that more Nugz are coming!
https://www.instagram.com/p/BSmI9s6F81l/?taken-by=condorcazador
Couple of weeks.
There is a surly one that is commonly available.
Brian Cdn
04-07-2017, 04:06 PM
Looks like Jagwire has an inline brake adjuster too.
http://jagwire.com/products/small-parts/inline-adjusters
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.