Serotta steel fork axle to crown

[Marcusaurelius]

I was just wondering if anyone knows the axle to crown distance on Serotta's 1" steel forks? (Every manufacturer seems to be different from 366mm to 372mm).

Since Reynolds uses 372mm I was thinking Serotta might use 372mm as well but I'm not certain since steel is a different beast than carbon.

[KevinK]

I can't tell you the measurements, but I can tell you that a Reynolds Ouzo Pro is about 13mm longer axle-crown than my steel Legend CR. The height difference is mostly in the thickness of the Ouzo's carbon crown. The Reynolds fork put the CR in a noticable "heads up" position which I didn't like.

Kevin

[David Kirk]

Is the fork lugged or unicrown?

Dave

[KevinK]

I don't know if the question was aimed at me, but the Legend CR crown is lugged.

Kevin

[Brian Smith]

Dave knows....lugged crown forks were built at 365mm unless they were ordered as touring forks.

[Marcusaurelius]

Dave knows....lugged crown forks were built at 365mm unless they were ordered as touring forks.


Thanks

[David Kirk]

Dave knows....lugged crown forks were built at 365mm unless they were ordered as touring forks.

Brian's got my back....365 it is.

Dave