View Full Version : Spectrum Super Ti FD Clamp size
PeregrineA1
02-01-2017, 07:47 PM
Anyone know the proper front clamp size for a Spectrum Super Ti? I've combed the Spectrum site to no avail.
TIA.
Jeff
cmbicycles
02-01-2017, 08:49 PM
Is this a bike you currently own? If so it is easy enough to measure. Spectrum Supers were/are custom and have changed over the years so hard to speculate without more details. You can always send Tom K an email or give a phone call too.
If I had to guess I would say if it has a 27.2 seat post, it is likely a 31.8mm clamp. If the seat post is larger and/or it has a shim in the frame for the seatpost as Merlin used then possibly a 34.9 FD clamp.
PeregrineA1
02-01-2017, 08:52 PM
Trying avoid a trip to the hardware store for a battery for the micrometer....
Yes, bike is here now.
Thanks.
cmbicycles
02-01-2017, 08:59 PM
Use the calipers/micrometer to get the diameter and check the tips against a ruler. 1 1/4 is 31.8 and 1 3/8 is 34.9
If you have a spare 31.8 stem around you can see if the profile of the stem faceplate matches the seat tube diameter. If it does you have a 31.8, if not you have 34.9
PeregrineA1
02-01-2017, 09:08 PM
34.9. Thanks.
Ordered from Jenson USA.
jlwdm
02-01-2017, 09:15 PM
Mine has a clamp on 34.9.
Jeff
oldpotatoe
02-02-2017, 05:00 AM
Trying avoid a trip to the hardware store for a battery for the micrometer....
Yes, bike is here now.
Thanks.
Circumference =pi × diameter
so diameter=circumference/pi
Got a metric tape measure?
About 11cm around? 34.9
About 10 cm? 31.8
if my 5th grade math is correct. :eek:
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.