PDA

View Full Version : Front shifter sticking


comish83
12-05-2016, 08:54 PM
My front shifter (shimano 105 triple :eek:) has become increasingly harder to shift into higher gear (2nd to 3rd). It has no problem down shifting. I tried spraying it with WD40 while going through the full range of motion to work out any grime or issues but that didn't seem to do much. Is this usually a sign of needing a new front shifter, cleaning the shifter or getting a new front derailleur? The bike is just over a decade old still stock.

dave thompson
12-05-2016, 09:13 PM
I would suspect the problem lies with the cabling. If it were my bike I'd install new housing and cables. I doubt the issue is with the derailleur.

oldpotatoe
12-06-2016, 05:31 AM
I would suspect the problem lies with the cabling. If it were my bike I'd install new housing and cables. I doubt the issue is with the derailleur.

Agree and make sure under BB guide isn't gunked up.

comish83
12-06-2016, 07:43 PM
You guys were totally right! Thanks so much!!!:hello:

tv_vt
12-06-2016, 09:34 PM
Yep. Cable guide under the BB can get really gummed up with spilled drink mix. Brush and hot soapy water solves that pronto.