Hindmost
11-03-2016, 03:56 PM
How is the rear supposed to shift?
The down-shifts to smaller cogs work great. The up-shifts to larger cogs takes a sight over shift and if I don't get it right the chain is not centered.
This is with 105 S shifters, a M-735 long-cage RD, HG chain (old, wide), and XTR 12-32 8-speed cassette.
I previously ran most of this setup for a several weeks and then put it away for 19 years, so memory does not serve. I have been through replacing, cleaning & lubing, and adjusting and am left puzzled.
Any advice would be appreciated.
The down-shifts to smaller cogs work great. The up-shifts to larger cogs takes a sight over shift and if I don't get it right the chain is not centered.
This is with 105 S shifters, a M-735 long-cage RD, HG chain (old, wide), and XTR 12-32 8-speed cassette.
I previously ran most of this setup for a several weeks and then put it away for 19 years, so memory does not serve. I have been through replacing, cleaning & lubing, and adjusting and am left puzzled.
Any advice would be appreciated.