Quark... How the fap do I get it off? And more!

[Dead Man]

The internets sayeth there's a 8mm hex slot inside the 10mm, but I can slide a 10mm all the way through. Ain't no 8mm bolt in there.

Sip wit dis?

http://i844.photobucket.com/albums/ab6/bkb0000/Mobile%20Uploads/image_zpsmry8niqp.jpeg
http://i844.photobucket.com/albums/ab6/bkb0000/Mobile%20Uploads/image_zps4oqcezdq.jpeg
http://i844.photobucket.com/albums/ab6/bkb0000/Mobile%20Uploads/image_zpsdejulwti.jpeg

Thanks

-B

[ANAO]

What bb interface is that? Looks like you need to remove the drive side from the spindle.

Sent from my SM-G930V using Tapatalk

[Cicli]

Comes off on drive side. Leave the retaining cap and loosen the center screw. It is self extracting so as you loosen, the drive side will come off.

[shovelhd]

You use the 10mm.

[Dead Man]

Drive side extraction.. Weird. Got it off... Thanks gents.

Btw - how do you tell which model it is? Some numbers here and there, but no model name that I can find

[Dead Man]

And another question... the big fat spacer on the drive side... should that stay with this crankset, or do I need to save that to plug on the new crankset that's going on this bike?

Are the BB30 spindle lengths all the same? Are the shell widths all the same on these pressfit BB30 shell frames?

Thanks again gents

-B

[Bruce K]

Call Quark to ID the crankset

Great customer service/support

BK

[Cicli]

Drive side extraction.. Weird. Got it off... Thanks gents.

Btw - how do you tell which model it is? Some numbers here and there, but no model name that I can find

Thats a S900 crank.

[kramnnim]

That's a Cinqo Saturn spider...S900 crank arms. Or S975?

There are...4 widths of BB shell that use 30mm spindles... BB30/PF30 are 68mm wide, BB30a is...5mm wider on the drive side? BBRight is even wider on the drive side, and BB386 Evo is 86mm wide. Not all 30mm spindled cranks are the same width...some only work with the 68mm wide shells. The one on your crank will work with any of them. The spacers should stay with the crank.

[shovelhd]

That looks like a QuarQ (not Quark) Riken S975 BB30.

[kramnnim]

Riken uses CR2032, this is the older one with the big battery.

[Bruce K]

Gotta love auto spell

:crap:

BK