BB30a to Shimano 24mm?

[Gummee]

Talked a customer out of his BB30 bottom bracket and into a Shimano D/A 9k crank and adaptor BB.

Didn't realize that C-dale went BB30a and now I've got a problem...

Is there an adaptor BB that goes from BB30a (73mm shell) to std Shimano 24mm spindle?

Wheels manufacturing is out. I left a VM for Enduro. What else is there?

??

M

[dvs cycles]

Talked a customer out of his BB30 bottom bracket and into a Shimano D/A 9k crank and adaptor BB.

Didn't realize that C-dale went BB30a and now I've got a problem...

Is there an adaptor BB that goes from BB30a (73mm shell) to std Shimano 24mm spindle?

Wheels manufacturing is out. I left a VM for Enduro. What else is there?

??

MChris King maybe?

[RobJ]

Earlier thread sling the same lines. PF30 was the issue but same as BB30.

http://forums.thepaceline.net/showthread.php?t=194318

[nate2351]

http://www.cannondalespares.com/FSA-BB30A-to-24mm-Reducers--Green/product_detail/3-42134

[RobJ]

Based on other recommendations I went with the Praxis for one of my bikes and it was excellent. As they describe, it's not just an adaptor.

https://www.praxiscycles.com/conversion-bb/

* posted in wrong thread *

[phutterman]

Isn't http://wheelsmfg.com/bottom-brackets/cannondale-bb30a/bb30a-adapters/bbright-adapter-for-shimano-cranks.html the Wheels MFG part? They show stock of it online, anyway.

[estilley]

Praxis all the way.

Have one on my CDale Cx9.

About to put one on my Mr Pink


Sent from my iPhone using Tapatalk

[velotrack]

Praxis all the way.

Have one on my CDale Cx9.

About to put one on my Mr Pink


Sent from my iPhone using Tapatalk


Guys, he is talking BB30A (which is asymmetric on one side). Typical adapter solutions don't work. From what I remember, the companies producing their adapters don't work.

c-bear bottom brackets will allow you to run shimano cranks, but they're ceramic and pricey.

[Gummee]

Guys, he is talking BB30A (which is asymmetric on one side). Typical adapter solutions don't work. From what I remember, the companies producing their adapters don't work.

c-bear bottom brackets will allow you to run shimano cranks, but they're ceramic and pricey.

I don't think this guy minds pricey based on the D/A Di2 on both bikes he's got

I'll look into the C-bear tomorrow

M

[dton]

Talked a customer out of his BB30 bottom bracket and into a Shimano D/A 9k crank and adaptor BB.

Didn't realize that C-dale went BB30a and now I've got a problem...

Is there an adaptor BB that goes from BB30a (73mm shell) to std Shimano 24mm spindle?

Wheels manufacturing is out. I left a VM for Enduro. What else is there?

??

M

C-Bear or Kogel (http://kogelbearings.mysimplestore.com/t/cannondale-bb30-a)

[kppolich]

BB30A isn't the same as BBRight?

Wheels MFG and Kogel make a BBright to BB24

[Gummee]

BB30A isn't the same as BBRight?

Wheels MFG and Kogel make a BBright to BB24

I thought that was the go-to solution too, but evidently BB30 has 42mm OD bearings and BB-Right is 46mm OD bearings

The BB-Right BB looks to be the ticket except for that pesky difference in OD

M

[MaraudingWalrus]

Wheelsmfg makes some claim about removing spacers to use BBRight BB adaptors with BB30a. I can't confirm exactly what that would entail.

WheelsMFG DOES make a bb30a to shimano bb. I believe bcroslin used one on the CAAD12 I'd sold him. Perhaps he can speak to it's efficacy more so than I.