Moots Road Fork+ Pacenti SL23 + Panaracer Gravel King 28mm

[oldfatslow]

Is anyone using this combintation?

I have a Moots VaMoots which I love. I built it up with a Wound Up fork.

Unfortunately, the Wound Up Fork can't accomodate a wheel with a Pacenti SL23 rim with a Panaracer Gravel King 28mm tire.

Does anyone know if the Moots fork will clear that tire with a Pacenti SL23 rim?

[AngryScientist]

you could always get this fork and be certain?

http://forums.thepaceline.net/showthread.php?t=189481&highlight=wound

[kohlboto]

On a recent visit to HampCo, Steve showed me the new Moots fork with a HED Ardennes/Vittoria Pave 27 combo. There was lots of room to spare. Pacenti/28s shouldn't be a problem.
It, of course, got me thinking about a new Hampsten...

[oldfatslow]

you could always get this fork and be certain?

http://forums.thepaceline.net/showthread.php?t=189481&highlight=wound

I already have a WoundUp fork and the tire doesn't fit.

On a recent visit to HampCo, Steve showed me the new Moots fork with a HED Ardennes/Vittoria Pave 27 combo. There was lots of room to spare. Pacenti/28s shouldn't be a problem.
It, of course, got me thinking about a new Hampsten...

Thanks. I'll look into it.

[echelon_john]

the woundup for sale here has 376mm axle-crown measurement, which means it's probably for long reach brakes, which means it will probably take at least 700x30.


I already have a WoundUp fork and the tire doesn't fit.



Thanks. I'll look into it.

[sparky33]

The new tapered Moots fork has tons of room for an oversized 28.
This Grand Bois tire measures just under 30mm on SL23 rims:
http://uploads.tapatalk-cdn.com/20160706/b10b3916de0d50e040695e59f442a90b.jpg

The old silver Moots straight 1 1/8 fork would not fit this combination...Basically no daylight between the brake and the tire.