Headbadge attachment

[F150]

An associate has stripped his late model DeRosa down to bare aluminum and clearcoated. The original headbadge was bonded/glued to the head tube, no rivets. Any surface prep and/or product recommendations to reattach headbadge over said clearcoat?

[pavel]

clear silicone sealant like you use in the shower. easy to apply, cheap, and easy enough to remove and retry if you screw up. At the same time, isnt going to come off unless you want it too.

[AngryScientist]

available at any auto parts store:

http://3mauto.com/media/catalog/product/cache/24/image/9df78eab33525d08d6e5fb8d27136e95/0/8/08061.jpg

[F150]

Many thanks!

[raygunner]

Thanks, this was on my mind too.

[jasonification]

So I picked up automotive mounting tape (3m super strength) and am hoping to attach it to the Bob Jackson. How have people done this? Am wondering if I just need one strip down the middle, maybe 3 strips horizontally/vertically? Thanks

Sent from my HD1907 using Tapatalk

[johnniecakes]

I attached one of the Jen Greene silver head badges to my Ti dean about 8 years ago with JB Weld. Still there

[p nut]

So I picked up automotive mounting tape (3m super strength) and am hoping to attach it to the Bob Jackson. How have people done this? Am wondering if I just need one strip down the middle, maybe 3 strips horizontally/vertically? Thanks

Sent from my HD1907 using Tapatalk

I use the 3m tape from HD. Use 2 or 3 strips to cover the whole badge then trim down to form. Works really well.

https://www.homedepot.com/p/3M-Scotch-1-in-x-1-66-yds-Permanent-Double-Sided-Outdoor-Mounting-Tape-411DC-SF/100575385

[jasonification]

I use the 3m tape from HD. Use 2 or 3 strips to cover the whole badge then trim down to form. Works really well.



https://www.homedepot.com/p/3M-Scotch-1-in-x-1-66-yds-Permanent-Double-Sided-Outdoor-Mounting-Tape-411DC-SF/100575385That's what I'm thinking of doing! We're you pretty meticulous to trim to form, or allowed them to stay mostly rectangular in nature?

Sent from my HD1907 using Tapatalk

[p nut]

That's what I'm thinking of doing! We're you pretty meticulous to trim to form, or allowed them to stay mostly rectangular in nature?

Sent from my HD1907 using Tapatalk

The badges I had were fairly round/oval so fairly meticulous and trimmed exact to fit. Actually, cut them a bit undersized as they sometimes bulged out a tiny bit upon application.

[BlueHampsten]

I have used Gorilla Contact Adhesive Clear Grip to install head badges and the Di2 junction box mount on the underside of my stem. I have never had an issue with neither the head badge nor the mount falling off even in hot weather.

Easy to remove if you want to keep the head badge or reposition it. Just turn a hair dryer on high and let the hot air soften up the adhesive until you can remove the head badge.

I found that cleaning the head tube or stem with an alcohol pad helps with adhesion.

Ride safe and stay healthy.

[COYO1]

So I picked up automotive mounting tape (3m super strength) and am hoping to attach it to the Bob Jackson. How have people done this? Am wondering if I just need one strip down the middle, maybe 3 strips horizontally/vertically? Thanks

Sent from my HD1907 using Tapatalk

I used the same 3M tape (I believe) it came in a yellow box and the tape is two sided black tape with a red vinyl backing one side that peels away? If so, this stuff is great, I mounted a Serotta head badge to my Legend ti (raw brushed Ti finish) and it has stayed there through summers and winters for over 7 years now.

[jasonification]

I used the same 3M tape (I believe) it came in a yellow box and the tape is two sided black tape with a red vinyl backing one side that peels away? If so, this stuff is great, I mounted a Serotta head badge to my Legend ti (raw brushed Ti finish) and it has stayed there through summers and winters for over 7 years now.Glad to hear! Did you mount it with just one strip or several? This is the badge in question..https://uploads.tapatalk-cdn.com/20201125/c885a31ab66f15ad834b25b3cfb717b9.jpg

Sent from my HD1907 using Tapatalk

[Michael Maddox]

I attached one of the Jen Greene silver head badges to my Ti dean about 8 years ago with JB Weld. Still there

+1

Alternatively, you can use industrial tape like 3M 5952. Cut and fit. But be CERTAIN it's where you want it.

[Hindmost]

Glad to hear! Did you mount it with just one strip or several? This is the badge in question..

Sent from my HD1907 using Tapatalk

The Bob Jackson head tube is not drilled and tapped to accept screws?

[jasonification]

No...mine is something under the paint as the original

Sent from my HD1907 using Tapatalk

[jasonification]

+1



Alternatively, you can use industrial tape like 3M 5952. Cut and fit. But be CERTAIN it's where you want it.Did you rough up the clear coat for better adhesion?

Sent from my HD1907 using Tapatalk

[duff_duffy]

+1 for 3m tape. Did on an old airborne badge, 3 thin strips placed haphazardly and stuck for years with no issues.

[Michael Maddox]

Did you rough up the clear coat for better adhesion?

Sent from my HD1907 using Tapatalk

No. You COULD, but I didn't find it necessary with this stuff.