Di2 grommets??

[crownjewelwl]

So I have an XTR Di2 set up. It is 1x so I don't run a wire for the front derailleur.

Anyone know where to source a plug to cover the hole??

THANKS!!

[oldpotatoe]

So I have an XTR Di2 set up. It is 1x so I don't run a wire for the front derailleur.

Anyone know where to source a plug to cover the hole??

THANKS!!

Hardware...cork. Rubber or cork.

[Rob1519]

You should be able to find what you need here

http://www.vibrationmounts.com/RFQ/VMV12R33M.htm

[zank]

I use these.

http://www.mcmaster.com/#9600k512/=12eremb

[11.4]

The trick with those plugs is to find ones small enough to fit the frame Di2 hole, and then to have one that doesn't deteriorate under the conditions of riding. I just put a dab of caulk on the inside of one of the Shimano Di2 grommets, then install the grommet. Even without the caulk, the grommet isn't going to leak any water. The grommets are a precision fit and look good, and they are extremely durable. You can also get them at any good bike shop.