What rear derailleurs will work with these Ergopower levers?

[TronnyJenkins]

I believe these (http://velobase.com/ViewComponent.aspx?ID=fb16812b-fe68-499b-bdc8-1803d45097d4&Enum=125) are the exact levers I have.

I would like to get something that looks C Record-ish if I can...

[oldpotatoe]

I believe these (http://velobase.com/ViewComponent.aspx?ID=fb16812b-fe68-499b-bdc8-1803d45097d4&Enum=125) are the exact levers I have.

I would like to get something that looks C Record-ish if I can...

Any modern, meaning post 1990 or so, Campagnolo rear der. Not true friction CRecord or first Gen index stuff like CDA or A-B Chorus. Something all alloy would look the part, like a der from 1992-1997/9, until they went to carbon bodies. 9 and 10s ones would work fine too w/o mods. Post 2000 ones over shift a wee bit but center fine.

[TronnyJenkins]

Any modern, meaning post 1990 or so, Campagnolo rear der. Not true friction CRecord or first Gen index stuff like CDA or A-B Chorus. Something all alloy would look the part, like a der from 1992-1997/9, until they went to carbon bodies. 9 and 10s ones would work fine too w/o mods. Post 2000 ones over shift a wee bit but center fine.

Thanks. I guess the trick for me is identifying them all since there are so many variations and models that are all alloy.

Is this (http://velobase.com/ViewComponent.aspx?ID=e570a3f6-831e-4633-a28d-5182eb826279&Enum=108) the first Ergopower compatible RD?

[oldpotatoe]

Thanks. I guess the trick for me is identifying them all since there are so many variations and models that are all alloy.

Is this (http://velobase.com/ViewComponent.aspx?ID=e570a3f6-831e-4633-a28d-5182eb826279&Enum=108) the first Ergopower compatible RD?

There is actually one before that that had 2 bolts at the pivots. Can be seen on early down tube shifter bikes used by Banesto in 1990/1, just before ERGO but they work well. On iPad too hard to link pic.

1990-1 R10 Record Corsa. Very rare tho.

[TronnyJenkins]

There is actually one before that that had 2 bolts at the pivots. Can be seen on early down tube shifter bikes used by Banesto in 1990/1, just before ERGO but they work well. On iPad too hard to link pic.

No problem. I'll do some searching. I appreciate the info.