where do i get downtube cable stops for LHT?

[zoom2zoom]

Where and which one do i get downtube cable stops for Surly LHT?

thanks in advanced

[weisan]

http://www.treefortbikes.com/product/333222398349/1396/Problem-Solvers-Downtube.html?gclid=CjwKEAiAkvmzBRDQpozmt-uluCQSJACvCd1l7E6n7KRZUvK3lbbyx7O5HH2cm8AytVN9i5sY uqSvpxoCOUPw_wcB

http://tfe.me/image/480_345/FS0069.jpg

[mtb_frk]

Shimano makes them as well. There are two different versions, flat and concave.

[zoom2zoom]

Do I need flat or concave? Thx

[Cicli]

Do I need flat or concave? Thx

I have never seen flat ones. They are usually contured for the downtube. Somewhat. Backing plates for DT shifters can be found either flat or concave.
You need the concave ones to match the profile of the downtube.

[pinkshogun]

flat ones are on bar end shifters for instance...they wont work around a down tube

[R3awak3n]

I like the metal campagnolo ones, if you can still find them :)

[guyintense]

I like the metal campagnolo ones, if you can still find them :)

Shimano's are far superior. Tongue planted firmly in cheek.

[zoom2zoom]

This one work?

[R3awak3n]

Yes it does, I have those in my wifes bike. Works fine. I do like these, I like the easy to tweak mechanism.

I dont prefer it to campagnolo kind, they are both great to me.

[jtakeda]

flat ones are on bar end shifters for instance...they wont work around a down tube

I use the flat ones on my MX Leader. The tubes are too fat for the concave ones.
For a lht concave should be the ones.

[pinkshogun]

I use the flat ones on my MX Leader. The tubes are too fat for the concave ones.
For a lht concave should be the ones.

oversized downtube on the MX?

[jtakeda]

oversized downtube on the MX?

Oversize is an understatement on the mxl