View Full Version : Spoke length calculation help
pinkshogun
11-10-2015, 05:18 PM
having some trouble with both EDD spoke calc and Pro Wheelbuilder.Com sites
Hub: Shimano RSX 7 speed model FH A-401
Rim: Mavic Reflex-clincher
Rear, 32 spokes, 3 cross
whatcha gettin'
pinkshogun
11-10-2015, 05:25 PM
Mods. can you move this to the General Discussion?
oliver1850
11-10-2015, 10:41 PM
prowheelbuilder says 604 for reflex clincher. Sheldon's database says 605. I'm not sure I have one to measure but will look around. Pretty sure I don't have the hub but found the dimensions for an A410 here:
https://leonard.io/edd/
45 mm flange diameter
center to left flange 36 mm
center to right flange 22.2 mm
spoke hole diameter 2.6 mm
The A416 has different center to flange specs - it is 130 mm.
ryker
11-10-2015, 11:57 PM
What kind of problem are you having?
pinkshogun
11-11-2015, 05:37 AM
EDD wasnt allowing me to enter the Mavic reflex rim but a day later it is
ProWheelbuilder didnt have the hub listed
looks like I'm at 295/294
oldpotatoe
11-11-2015, 05:47 AM
EDD wasnt allowing me to enter the Mavic reflex rim but a day later it is
ProWheelbuilder didnt have the hub listed
looks like I'm at 295/294
I get the same, 294/295...Depending on how many times the hub has been built, may want to subtract 1mm if more than once.
weisan
11-18-2015, 05:50 PM
m
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.