PDA

View Full Version : WTB: Power tap 12mm 11-speed freehub


foo_fighter
11-10-2015, 12:49 PM
Looking to run an 11 speed cassette on an older powertap hub.

I know it's a long shot but someone may have a campy freehub or the elusive 12mm 11speed Shimano freehub or even a compatible novatec 11speed 12mm freehub in their parts bin.

Thx.

Look585
11-10-2015, 01:04 PM
I have a couple 12mm C11 bodies leftover.

I was able to graft on a 12mm S11 FHB from a Novatec rear, but the cassette<>spoke clearance is *really* tight. You need to run a wide range cassette to keep the RD out of the spokes. 11-28 & 11-32 worked OK, 11-25 would be iffy.

The FHB came from a Novatec F172SB hub and was very easy to mount.

http://www.ebay.com/itm/181908276807

phutterman
11-10-2015, 04:17 PM
That's really good to know. Not sure I'll do it, but good to know keeping my 12mm-axle Powertap and going to 11s aren't as mutually exclusive as I'd considered them to be.

old fat man
11-10-2015, 07:42 PM
I'm pretty sure I have one of the 12mm Campy cassette bodies too. Let me know if you need it.

foo_fighter
11-10-2015, 09:51 PM
Thanks. I'm good for now. The Paceline came through!

I'm pretty sure I have one of the 12mm Campy cassette bodies too. Let me know if you need it.