11 Speed Campy w/ shimano cassette?

[norcalbiker]

I have an 11 speed campy record and I am thinking of using a set of wheels with shimano/sram freehub body. Would this work if I used an 11 speed shimano cassette?

[Ryun]

Works nicely. I swap them around all the time. No issues

[jdp211]

100% compatible. Whether or not the wheels are able to take a Shimano 11 cassette is a different story.

[Blown Reek]

Clarification... if the cassette body is a Shimano 11-speed it'll work.

[norcalbiker]

Works nicely. I swap them around all the time. No issues

Cool! Good to hear. Btw, Campy 11 speed chain will work on 11 speed shimano cassette?

Thanks

[norcalbiker]

100% compatible. Whether or not the wheels are able to take a Shimano 11 cassette is a different story.

The set of new wheels that I have is for shimano/sram system. So instead of me buying a different freehub body, I'll just get a shimano cassette.

[denapista]

I'm riding Campy SR11, Shimano 11s (9000) chain. I've also run Shimano 11s cassette on Shimano wheels with Campy drivetrain. All works with no issues whatsoever.

[thermalattorney]

Good to know about the chain compatibility as well. I had done a lot of googling and couldn't find any info, so I ended up buying a KMC X11SL.

[tiretrax]

I believe this will end in 2015.

[ajz07]

I have had this worry as well...However, while they changed the gear pulls/ dérailleur throws, I do not think they changed the cassette spacing (please correct me if I am wrong). As a result although you now have to use new rear, front and shifters for 2015 campagnolo chorus and above (i.e. not backwards compatible) I don't believe the cassette is any different. If this is true than the cross compatibility should still be present. Anyone tried it?


I believe this will end in 2015.

[oldpotatoe]

I have had this worry as well...However, while they changed the gear pulls/ dérailleur throws, I do not think they changed the cassette spacing (please correct me if I am wrong). As a result although you now have to use new rear, front and shifters for 2015 campagnolo chorus and above (i.e. not backwards compatible) I don't believe the cassette is any different. If this is true than the cross compatibility should still be present. Anyone tried it?

2015 Chorus/Record/SR shifters, need 2015 Ch/Re/SR rear der. You can use a previous front der although the 2015 ones work better. Any crank, cog set, brakes.

[Ryun]

Ive used a 9000 cassette and a 6800 cassette in a 2015 SR11 setup with no issues also.
Like others have mentioned, all the cable pull/geometry changes for the new shifters and mechs did not effect the cog spacing