View Full Version : Anybody had powdercoat done to match an ENVE fork?
echelon_john
03-14-2015, 01:25 PM
Looking for the specific code for a matte black that matches the ENVE fork finish.
???
Hindmost
03-14-2015, 01:58 PM
The powder coaters I have used have good samples on hand.
http://cardinalpaint.com/products/productcat.php?pcid=2&cctid=9
Chris
03-14-2015, 02:06 PM
Can you powder coat carbon? I thought the heat involved prevented you from doing so.
echelon_john
03-14-2015, 02:28 PM
Not doing the carbon; doing the aluminum frame to match
sworcester
03-14-2015, 04:02 PM
Can you powder coat carbon? I thought the heat involved prevented you from doing so.
No, powder coating requires the material to be conductive
ultraman6970
03-14-2015, 05:33 PM
Conductive and not melting-able :D
No, powder coating requires the material to be conductive
John H.
03-14-2015, 06:21 PM
I would get them both refinished- that way you could ditch the Enve logos.
yashcha
03-14-2015, 06:38 PM
The closest is called Blackjack by http://www.prismaticpowders.com/powder-coating-colors/
It came out nicely.
http://i50.photobucket.com/albums/f331/yashcha/image.jpg1_zps6rmq7pyh.jpg
echelon_john
03-14-2015, 06:44 PM
Thank you! ; )
the closest is called blackjack by http://www.prismaticpowders.com/powder-coating-colors/
it came out nicely.
http://i50.photobucket.com/albums/f331/yashcha/image.jpg1_zps6rmq7pyh.jpg
yashcha
03-14-2015, 06:49 PM
Thank you! ; )
Happy to help.
teleguy57
03-16-2015, 02:55 PM
John, not the exact color you're seeking, but a similar look/feel to the finish texture (http://www.velominati.com/reverence/brush-strokes-on-the-soul/#comment-803355). Yowza....
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.