PDA

View Full Version : Campagnolo Wavy Washer question


Brian Cdn
02-20-2015, 12:38 AM
Question for the Campy tech guys...

Is it possible to use a PowerTorque wavy washer on an Ultra Torque crank?

Thanks

oldpotatoe
02-20-2015, 06:47 AM
Question for the Campy tech guys...

Is it possible to use a PowerTorque wavy washer on an Ultra Torque crank?

Thanks

Never tried it but I suspect it's too fat, to thick, to much compression. Why?

Black Dog
02-20-2015, 06:52 AM
If you need an UT wavy washer I will drop one in the mail for you. I have a bunch of them in my tool box.

Brian Cdn
02-20-2015, 08:23 AM
Picked up a UT C/set that was missing the correct washer.

I could use one of those wavy UT washers out of your toolbox.
It'll sure save me from a very frosty -30c ride to the LBS this morning.

I'll PM you address details

Thanks Daryl.

Cheers

gfk_velo
02-20-2015, 03:13 PM
Never tried it but I suspect it's too fat, to thick, to much compression. Why?

You are 100% correct - you might end up with the washer squashed plat and still no float, depending on how "in tolerance" the BB shell is. PT washer is designed to work differently although it is of course doing the same job ... => it's designed to sit external to the cup.

HTH
Graeme
Velotech Cycling Ltd
Campagnolo Main SC, UK

gfk_velo
02-20-2015, 03:14 PM
"squashed flat" even ...