View Full Version : New Retroshift allows Shimano 10 Dynasys with drop bar shifters
eddief
01-14-2015, 11:12 AM
so when we run out of 9 speed rear derailleurs we 10 speeders can move to this:
http://www.bikerumor.com/2015/01/12/gevenalle-adds-gx-drop-bar-shifters-for-shimano-10-speed-mtb-derailleurs-first-look-actual-weights/
Gummee
01-14-2015, 11:15 AM
emailed Microshift about their 10sp mtn thumb shifters (yeah, I'm WAY olde schoole) and was directed to QBP.
...so pretty much any LBS with a QBP account can order you up some shifters that'll work. If you get some Paul's Thumbie mounts, you're golden.
M
keevon
01-14-2015, 11:27 AM
The key thing here is compatibility with Shimano's 10 speed clutch derailleurs. You could pair these with a short cage Zee rear derailleur and a narrow-wide chainring for a lower-cost SRAM CX1 alternative.
Microshift announced the 10 speed MTB thumbies and bar-end shifters at Interbike. Unfortunately they're nowhere to be found, except on the Gevenalle levers and stock on the 2015 Long Haul Trucker:
http://www.microshift.com.tw/BS-M10.html
I fantasize about converting these to downtube use and having a 1x10, clutch derailleur, downtube shifter road bike.
CMiller
01-16-2015, 05:48 PM
@Gummee thanks for the note on the thumb shifters.
Both thumb shifters and the Gevenalle integrated offering seem like a great choice for an adventure bike.
thirdgenbird
01-16-2015, 06:15 PM
The hydraulic brakes with a 10spd zee RD could make for a pretty cool setup.
I would have seriously considered a 10spd thumbie on my stumpjumper had it been available when I built it.
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.