Moving sale with pics

[8aaron8]

-Haven't been riding the track bike at all, so letting this one go as a complete build or frame fork combo. I built this frame using a vintage columbus pl tubeset I acquired. The frame has tight clearances at the front wheel down tube. Built with a full gipiemme crono pista group. Cranks, pedals, headset, hubs laced to mavic open pro cd, seat post, flite reissue saddle, 3t 125mm stem with cinelli crit bars, binda straps, cortez clips.
75* ht angle and 73* seat tube angle
56 c-c st 53.5 c-c tt

The frame has no paint, the oil used to keep the tubeset from rusting solidified itself to the tubes so I only cleaned the ares where the tubes where joined giving the frame a nice purple-ish tone. I have had zero rust issues. The frame has been internally treated. I can swap parts depending on your needs/wants.

Complete bicycles $1400 net
Frame and fork $750net

https://farm4.staticflickr.com/3760/9659934744_29ea02fb8c_b.jpg

-Vintage serfas lola vgc $15https://farm3.staticflickr.com/2923/14671238995_8fa0f42c00_b.jpg

-Nitto b123AA track bars 40cm, GC, tape residue on bars, very light njs $50https://farm8.staticflickr.com/7337/12228860016_ae80e7b539_b.jpg

-3TTT track bars, deep drop similar to cinelli 67's, GC, $50https://farm4.staticflickr.com/3893/14668102841_ec16df77a5_b.jpg

-Cinelli 1A 85mm VGC, missing bar clamp bolt scratches below min insertion $15https://farm6.staticflickr.com/5571/14484615180_0b0b688b57_b.jpg

-Bianchi labeled road cranks, take offs from vintage 80's Bianchi, 52/42 rings, 144bcd, GC, 170mm $35https://farm4.staticflickr.com/3908/14484593228_3cbd4be6dc_b.jpg

-Campagnolo derailleur alignment tool $pending https://farm9.staticflickr.com/8640/15597326924_6584882e49_b.jpg

More to come

[foo_fighter]

Pm'd on the Romin saddle.

[8aaron8]

Romin saddle, c-record cranks and derailleur tool pending payment. More to come this afternoon.

[elong8]

Are those Ofmegas track cranks?


Sent from my iPhone using Tapatalk

[8aaron8]

No, just road cranks missing the inner ring

[yarg]

"The frame has tight clearances" - You can say that again!

[8aaron8]

Romin and c-record cranks are gone

-Campagnolo record (high/low flange) pista track hubs tied and soldered to nisi tubulars, very lightweight and stiff wheels. Glued to yellow jersey tubulars that hold air $240 https://farm6.staticflickr.com/5478/12228325745_40fa7c1f26_b.jpg

-Shimano 600 aero brake levers, could use new hoods $15 https://farm4.staticflickr.com/3838/14484822267_d00770df41_b.jpg

-Shimano tri-color brakeset, pads in great shape, some pitting on the bolt, missing one barrel adjuster and both recessed nuts $15

-Tektro r530 front brake brand new missing barrel adjuster and recessed nut $10

-Tektro long reach front brake, brand new missing recessed nut $10https://farm4.staticflickr.com/3859/14484632369_6491d97f2f_b.jpg

-Ultegra 6600 front derailleur, 34.9 clamp, works fine, sorry for the bad photo https://farm8.staticflickr.com/7471/16032375950_4d0b85f9af_b.jpg

-Shimano 105 5501 long cage rear derailleur in great condition $30, look like this http://www.ucycle.com/merchant/2856/images/zoom/RD-5501-S-B.jpg

[8aaron8]

Open to offers, discounts on multiple items, thanks