View Full Version : front deraileur clamp size
shankldu
12-04-2014, 12:03 PM
i have a stevens vapor aluminum c cross frame that takes a 27.2 seat post , any ideas on the clamp size in need on the front diameter i need i cant find it even on mfs site. thanks
ultraman6970
12-04-2014, 12:11 PM
Probably is 32 mm. Dont remember seen (doesnt mean there's none) a 27.2 seat tube aluminum bike with a 50 cal cannon as a seat tube that could take 35 clamps.
druptight
12-04-2014, 12:53 PM
Don't guess - wrap a piece of paper around it, then measure it.
nooneline
12-04-2014, 01:29 PM
Don't guess - wrap a piece of paper around it, then measure it.
that'll give you the circumference. divide by pi and that'll give you your diameter.
druptight
12-04-2014, 01:38 PM
that'll give you the circumference. divide by pi and that'll give you your diameter.
Right! What I get for responding too quickly at work. Still better than guessing!
Vinci
12-04-2014, 02:30 PM
Probably is 32 mm. Dont remember seen (doesnt mean there's none) a 27.2 seat tube aluminum bike with a 50 cal cannon as a seat tube that could take 35 clamps.
CAAD9's are 27.2 and 34.9. So is my Litespeed, though that's titanium.
I assumed the same as you and have the erroneously-purchased derailleur to prove it. :(
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.