colnago mexico geometry

[ivanooze]

does anyone know if there are any sites or catalogs that might have the geometry to older colnagos?
-i'm mainly looking for the 1984 colnago mexico frame geometry. If anyone has any info i would greatly appreciate it

[beeatnik]

does anyone know if there are any sites or catalogs that might have the geometry to older colnagos?
-i'm mainly looking for the 1984 colnago mexico frame geometry. If anyone has any info i would greatly appreciate it

it's the same as the new colnagos. which is to say it's the same as the current master.

[ivanooze]

sounds good. i'll do some searching

[thirdgenbird]

I found one, and if I recall, it did match the current master.

[ivanooze]

I found one, and if I recall, it did match the current master.

you found the mexico geometry? i believe i found one to, but do you mind posting yours?

[thirdgenbird]

I didn't save it. If I remember correctly, I didn't bother because it was in fact standard colnago geo. I've got a 1984 Nuevo Mexico sitting about 10ft front me if you want me to confirm any measurements from your chart.

[ivanooze]

I didn't save it. If I remember correctly, I didn't bother because it was in fact standard colnago geo. I've got a 1984 Nuevo Mexico sitting about 10ft front me if you want me to confirm any measurements from your chart.

sure: this is what i found, just scroll all the way down. i believe the frame size thats shown is a 58 but ehh.
http://www.velociao.com/2011/colnago-mexico-1976/

[thirdgenbird]

Mine is a size up from that so no dice.

[wallymann]

fwiw here's a colnago geometry chart (http://brown-snout.com/cycling/tech/_ColnagoGeometryReference.pdf), if your mexico follows the current master geometry it'd be on the "old" left-side.

[thirdgenbird]

Mice seems to fall between the 58 and 59 on that chart.