Paul Mini-Moto Question...

[buldogge]

Hey guys…Anyone know the arm length measurement on a Paul's Mini-Moto???

I'm trying to see if they will clear my fender set-up.

I test mounted a Tektro 926AL today, that I had laying around, and it was a no go.

The 926AL seems to be 80mm c-c between the mount bolt and the noodle pivot or cable pinch…need more.

(paging Eric Baumann…Paul's #1 fan)

TIA
-Mark in St. Louis

[donevwil]

From Gravelbike.com (http://www.gravelbike.com/?p=3298).

[GRAVELBIKE]

83mm (more here (http://www.gravelbike.com/?p=3298)).

[buldogge]

Hmmm...Any experience with any of the slightly longer models...say 87-90mm working OK with Campy Ergos???

TIA
-Mark

[GRAVELBIKE]

Hmmm...Any experience with any of the slightly longer models...say 87-90mm working OK with Campy Ergos???

TIA
-Mark

Longest I've ever used with Campy were 85mm (worked fine). You would end up with the pads very close to the rim when paired with 87-90mm brakes.

[buldogge]

OK...Thanx...I just took a chance and ordered a Shimano BR-R353.

TA
-Mark

Longest I've ever used with Campy were 85mm (worked fine). You would end up with the pads very close to the rim when paired with 87-90mm brakes.