10 to new 11

[hainy]

Ulta Torque Campy Centaur 10 to New 2015 Chorus 11.

I need chain, cassette, derailluers, gear levers, crankset. I there anything else I need to change.

Cheers

Hainy

[mktng]

Freehub.. If needed. :)

[teleguy57]

Not sure you need a new crankset; I've run 10s Campy cranks/rings with pre-2015 11 speed without issue.

C11 cassettes run on all 9/10/11 Campy freehubs -- the Campy freehub has remained unchanged for quite some time (OldPotatoe can give the specific dates, probably up to the hour and minute:))

[jbrainin]

Not sure you need a new crankset; I've run 10s Campy cranks/rings with pre-2015 11 speed without issue.

Yup, old crankset will work just fine.

[mktng]

I'm clearly a Shimano dude. :P

[teleguy57]

I'm clearly a Shimano dude. :P

We all have our frailties :)

[hainy]

Thanks Guys,

Keeping the old cranks will make the equation a lot cheaper and I quite like them.

Cheers

Hainy

[likebikes]

cables, housing, and bartape

[hainy]

I'm clearly a Shimano dude. :P

We all make mistakes

[hainy]

cables, housing, and bartape

Thanks I had forgotten those

[thwart]

If you really want to do the changeover for minimal $, you can use your 10 spd RD, with a bit of work on the fastening bolt.

'Dave', who still posts here occasionally, has a post from a few years ago about how to do it.

[hainy]

The Rd has done 7 years hard labour and needs to good rest. I will put it in the parts bin for now

[Steve in SLO]

10 speed FD should work, as well.

[hainy]

I will just but new deraileurs.

So I am assuming the current 11 speed crankset is fine with the 2015 chorus stuff. Just want to make sure as I do have one of these.

Cheers and thanks for all the help

Hainy

[GeorgeTSquirrel]

If you really want to do the changeover for minimal $, you can use your 10 spd RD, with a bit of work on the fastening bolt.

'Dave', who still posts here occasionally, has a post from a few years ago about how to do it.

I'm not even certain of that... others have claimed that it worked without modification. Not to doubt Dave, he's said some brilliant stuff both here and on other forums... but there are definitely conflicting reports out there in regards to using a 10speed RD with 11speed Campy.

[tmf]

cables, housing, and bartape

The new shifters should come with housing and cables.

[oldpotatoe]

Ulta Torque Campy Centaur 10 to New 2015 Chorus 11.

I need chain, cassette, derailluers, gear levers, crankset. I there anything else I need to change.

Cheers

Hainy

'Need' only shifters and ders, cogset and chain and a 11s big chainring altho with 11s, 2015, the 10s will probably work. No FH required ala shimano, spam

[oldpotatoe]

I'm clearly a Shimano dude. :P

We all have our cross to bear. BUT salvation is near..as close as the place that sells Campagnolo, Praise Eddy Merckx!!

[oldpotatoe]

If you really want to do the changeover for minimal $, you can use your 10 spd RD, with a bit of work on the fastening bolt.

'Dave', who still posts here occasionally, has a post from a few years ago about how to do it.

Probably not with 2015 stuff. I really don't know yet tho.

[oldpotatoe]

10 speed FD should work, as well.

'Should' altho with 2015 shifters, I don't know yet. Some have said it doesn't but....

[mktng]

Speaking of being a shimanoite. I recently built up a bike with 10spd Centaur. Quickly fell in love with the option to dump the cassette with one swift shift. Do the new Campagnolo mechanical groups have that option? Went back to my 7900 bike and instantly missed the thumb shift and cassette dropping Hahaha.

[FlashUNC]

Speaking of being a shimanoite. I recently built up a bike with 10spd Centaur. Quickly fell in love with the option to dump the cassette with one swift shift. Do the new Campagnolo mechanical groups have that option? Went back to my 7900 bike and instantly missed the thumb shift and cassette dropping Hahaha.

Everything Chorus and above has that option in the current lineup.

Most cost effective solution is Chrous shifters with all the other bits being Athena.

[hainy]

Does anyone know whether the current chorus 11 levers will be compatibole with the 2015 stuff?

[thirdgenbird]

Does anyone know whether the current chorus 11 levers will be compatibole with the 2015 stuff?

The uk support center says no