View Full Version : Tubular rim ID
enr1co
10-12-2014, 03:40 PM
Hoping to identify a tubular hoop model/mfg which is absent of any stickers or stamps on a friends bike. The rim has a light blue/grey anodize finish to it and was built in the late 1990'a around some 90's Record hubs .
I dont think its anything from Mavic as they typically have a rounded edge to the brake surface? These have a sharper edge to them.
Thanks for the ID help!
http://imagehost.vendio.com/a/3577307/view/P1070948.JPG
http://imagehost.vendio.com/a/3577307/view/P1070832.JPG
ultraman6970
10-12-2014, 04:49 PM
Ultra never seen that rim.
Hindmost
10-12-2014, 05:14 PM
My Reflexes from that period have a sharp transition to the machined brake surface, similar to that in your pictures. Mine are medium/dark gray.
I believe it is a Mavic. I have this rim from similar era. I have also seen this rim one other time laced to 7400 hubs.
http://i.imgur.com/0bXwrV2.jpg?1
Mike V
10-12-2014, 06:07 PM
Mavic Reflex SUP
djg21
10-12-2014, 06:28 PM
My Reflexes from that period have a sharp transition to the machined brake surface, similar to that in your pictures. Mine are medium/dark gray.
Looks like old Reflexes I once owned, with the bluish anodized finish.
thirdgenbird
10-12-2014, 06:36 PM
Every part on that half of the bike is perfect. Happen to have a picture of the other half?
enr1co
10-12-2014, 08:39 PM
Every part on that half of the bike is perfect. Happen to have a picture of the other half?
http://imagehost.vendio.com/a/3577307/view/P10709801.JPG
thirdgenbird
10-12-2014, 08:47 PM
Nicely done
buldogge
10-12-2014, 08:47 PM
^^^Beautiful! (if anything…lose the anatomic bars! ;) )
-Mark in St. Louis
regularguy412
10-12-2014, 09:13 PM
Mavic Reflex SUP
I'd agree with this. I had a set of Reflex clinchers that looked almost exactly like that.
Mike in AR:beer:
enr1co
10-12-2014, 10:05 PM
Thanks all for the assessment and ID- sounding like they could be Mavic hoops after all.
Mike V
10-13-2014, 12:06 AM
http://velobase.com/ViewComponent.aspx?ID=4D3D3FE3-F9BB-48CC-9FF7-695BD2184D10&Enum=107&AbsPos=0
enr1co
10-13-2014, 12:53 PM
^^^Beautiful! (if anything…lose the anatomic bars! ;) )
-Mark in St. Louis
Yeah, I would prefer silver traditional looking bars if it were mine but he'll likely want to just sell as is.
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.