Fork recomendation

[Cicli]

My Lynskey needs a new fork. Its a 1.125" threadless steer tube and I am looking to run a 28mm tire with no issues. The current fork is a Lynskey whatever and the tire is very close to the bottom of the crown. I am running a 6700 brake.
Anyone have and advice?
Also, if you have anything to sell. I am looking.

Thanks!

[dave thompson]

When I queried Enve about tire fit on their 2.0 fork, they told me that a 28mm would fit easily. I have that fork on my Tsunami with a 28mm Ultremo ZX on a HED C2 rim so the tire measures an actual 31mm with good clearances on the top and sides.

[Cicli]

When I queried Enve about tire fit on their 2.0 fork, they told me that a 28mm would fit easily. I have that fork on my Tsunami with a 28mm Ultremo ZX on a HED C2 rim so the tire measures an actual 31mm with good clearances on the top and sides.

Awesome, I read somewhere it was tight but that sounds like it will work fine.

Thanks.

[dave thompson]

Awesome, I read somewhere it was tight but that sounds like it will work fine.

Thanks.
Not tight at all.