View Full Version : Tools4Bikes Velomount Bike Bicycle Quick Release
godfrey1112000
08-04-2014, 03:57 PM
DOES ANYONE HAVE ANY EXPERIENCE WITH THIS ITEM, IT FOR REAR MOUNTING, I AM PLANNING TO USE INSIDE MY SUV
https://tools4bikes.com/velomount.html
THANKS FOR YOUR HELP
ultraman6970
08-04-2014, 05:43 PM
Interesting, did not know this company.
I used a couple of them. They aren't secure from theft -- you can cable-lock the bike to the bracket but the bracket can be removed in a few seconds, and there are usually tie-downs in a truck or suv to lash a cable to.
The base on mine came a little bit loose from the top. The shims on the quick release were a pain and always took both hands to work right, so you had to use your shoulder to keep the bike in position. In the back of a pickup this was ok but you had to be in the bed. Anywhere up higher, I'd be very skeptical.
These are designed for a lot of flexibility in type of axle, but that's more of a MTB thing than road.
The ones that I really liked are http://www.biketote.com. For an SUV you can get a crossbar that has lever-actuated pressure grippers on each end to fit it snugly in place. The crossbar can then take a big range of fork holders, rear wheel holders, and loose front wheel holders. We used one inside a pickup truck as a race support system, installed it in a Suburban for long-distance travel, and actually mounted it upside down in the roof of a high-roof Mercedes Sprinter so the bikes hung down from it. worked fine in each version.
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.