Rear hub for 135mm disc Campy11

[dan682]

Looking at a new project, what hubs are available for 135mm spacing, disc and Campy? So far King is the only one I've found.

Thanks,

Dan

[wallymann]

Looking at a new project, what hubs are available for 135mm spacing, disc and Campy? So far King is the only one I've found.

Thanks,

Dan

powertap, no?

[EricEstlund]

White Industries CX11. Nice hub.

[enr1co]

http://forums.thepaceline.net/showthread.php?t=122002

[GeorgeTSquirrel]

Lots of options...

When I build up a Ritchey Swiss Cross (disc) once they are released, I think I'm going to use a DT 350 or maybe Hope and just swap out the free hub for the correct splines.

There's also the Novatec's and anyone using them (Stans?) and maybe Velocity? Not sure who makes the Velocity hub, but they have a Campy option.

White Ind. of course.

[zachateseveryth]

you can also just run a shimano 11-speed hub and cassette if you want to go with a lower cost solution that chris king or white industries.

[dan682]

Thanks for the suggestions!

[oldpotatoe]

Looking at a new project, what hubs are available for 135mm spacing, disc and Campy? So far King is the only one I've found.

Thanks,

Dan

DT....just swap the FH body, I think WI also

[vqdriver]

related. do all the dt hubs take the same freehub body?
190, 240, 350, etc will all take the campy road freehub?

[crownjewelwl]

going through same process...

wi, dt swiss, and king is what i came up with

im going dt swiss w/centerlock

[oldpotatoe]

related. do all the dt hubs take the same freehub body?
190, 240, 350, etc will all take the campy road freehub?

Of the 3 you mention, yes.