Shimano band-on adapter

[uncrx2003]

Does anyone know if the new 6800 braze-on FD will work with this clamp?

http://www.competitivecyclist.com/shimano-sm-ad11-braze-on-front-derailleur-adapter-clamp

[oldpotatoe]

Does anyone know if the new 6800 braze-on FD will work with this clamp?

http://www.competitivecyclist.com/shimano-sm-ad11-braze-on-front-derailleur-adapter-clamp

Probably, I'd be surprised shimano would make a fder that wasn't compatible with their own adapter..... Wait a minute, did I just say that?

Should work fine with a 6800 fder.

[Cicli]

It depends.
Is Shimano trying to sell 11 speed adapters?:eek:
If they are, they will tell you it is less that optimal without the 11 speed adapter. In reality, it will work fine.

[Gummee]

That's what mine's mounted on.

Just make sure you stick the little metal tab on your seat tube before setting the set screw.

M

[oldpotatoe]

That's what mine's mounted on.

Just make sure you stick the little metal tab on your seat tube before setting the set screw.

M

Good call even more important on carbon frame with brazeons, like Cervelo.

[11.4]

They actually make two different FD clamps for 6800 and for 9000. The bolt hole is at a different height so the mounting isn't quite compatible. Some people use the other and on some frames it works, on some it doesn't.