View Full Version : Canti.brake question
sokyroadie
04-06-2014, 12:00 PM
First off, I know, go with mini-vee's. I bought some Campy (not sure who makes them in Taiwan) cantilevers to go on a Serotta CDA cross frame. The rears seem OK. The fronts on a Ritchey cross fork are loose, there is about a .5mm play front to back when the screw is tight. Do I just need to file the studs shorter.
Thanks,
Jeff
nooneline
04-06-2014, 12:16 PM
I've had that happen with a couple of brakes. Not a problem. You can either leave it as is, or you can slip a washer on. No need to file the posts.
oldpotatoe
04-06-2014, 01:32 PM
First off, I know, go with mini-vee's. I bought some Campy (not sure who makes them in Taiwan) cantilevers to go on a Serotta CDA cross frame. The rears seem OK. The fronts on a Ritchey cross fork are loose, there is about a .5mm play front to back when the screw is tight. Do I just need to file the studs shorter.
Thanks,
Jeff
Yep, posts a little to long. Washers on first maybe, find shorter posts, or if they work ok, nothing.
Made by Tektro, btw.
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.