PDA

View Full Version : Campagnolo freehub body compatibility


weekendroadie
03-19-2014, 09:10 PM
Hey, anyone know if a 07/08 Bora ultra will take a 2010 shamal freehub body.
Been looking online for what years and wheels the freehubs fit but still haven't found for sure what works. Thx

buldogge
03-19-2014, 09:12 PM
I believe 2006 is the change year for the round and lobed axles. Round will fit both (all) and lobed will only for 2007+. OP could confirm…

-Mark in St. Louis

Hey, anyone know if a 07/08 Bora ultra will take a 2010 shamal freehub body.
Been looking online for what years and wheels the freehubs fit but still haven't found for sure what works. Thx

weekendroadie
03-19-2014, 09:28 PM
That's what I'm getting with online research 2007 and up should fit with bora, shamal, eurus that use loose bearing hubs. So I should be ok with a 2010-11
freehub from a shamal onto a 2007 Bora Ultra hopefully.
Any changes with newer hubs like 2012 and up? Thx

buldogge
03-19-2014, 09:31 PM
Not with 2012/13 at least…newest I have are '13 Zondas.

-Mark

That's what I'm getting with online research 2007 and up should fit with bora, shamal, eurus that use loose bearing hubs. So I should be ok with a 2010-11
freehub from a shamal onto a 2007 Bora Ultra hopefully.
Any changes with newer hubs like 2012 and up? Thx

oliver1850
03-19-2014, 10:12 PM
Should work. PN for 2007/8 Bora Ultra FHB is FH-BO015. 2010 Shamal FHB has same PN.

weekendroadie
03-19-2014, 10:17 PM
Was just on the campy tech docs your right.

oldpotatoe
03-20-2014, 07:32 AM
I believe 2006 is the change year for the round and lobed axles. Round will fit both (all) and lobed will only for 2007+. OP could confirm…

-Mark in St. Louis

That is correct..so yes, the FH bodies should be Interchangable. Also correct, the older body fits onto the lobed axle but not the other way around. The HG FH body(shimano) fits on all.

sfscott
03-20-2014, 03:40 PM
Is it possible to put a Shimano free hub body on a Campy Record hub?

Why? Would like to avail myself of some of the lower gearing offerings out there on the dark side but do not want a new hub or to rebuild the wheel.

Joachim
03-20-2014, 03:44 PM
Is it possible to put a Shimano free hub body on a Campy Record hub?

Why? Would like to avail myself of some of the lower gearing offerings out there on the dark side but do not want a new hub or to rebuild the wheel.

Yes, buy a Fulcrum hub body with Shimano spines and install on a Campagnolo hub. I have.

oldpotatoe
03-20-2014, 03:52 PM
Is it possible to put a Shimano free hub body on a Campy Record hub?

Why? Would like to avail myself of some of the lower gearing offerings out there on the dark side but do not want a new hub or to rebuild the wheel.

Yes, Campagnolo made HG/shimano compatible FH body. Both 10s and 10/11s, get the 11s one.