Campagnolo Centaur Rear Derailleur Repair

[kenmetzger]

I need to replace the mounting sleeve on a Centaur derailleur, but cannot find the correct way to remove the old one. Would love some help on this one.

[cnighbor1]

I need to replace the mounting sleeve on a Centaur derailleur, but cannot find the correct way to remove the old one. Would love some help on this one.
go to campy web site tech section and look for photo of breakaway view of your RD maybe that will allow you to figure it out
if it is the one that has wound up spring inside 1st you have to remove stop pin and let spring unwind than hopefully do the reverse to put it back together I have done it on older RD

[oldpotatoe]

I need to replace the mounting sleeve on a Centaur derailleur, but cannot find the correct way to remove the old one. Would love some help on this one.

Latest one..cannot do it w/o the tool to re-install a new one. The torx needs to be drilled out, then Campagnolo NA has the press to put a new one in.

Warranty?

[kenmetzger]

Thanks, oldpotato. Not what I wanted to hear, but good to have the answer.

[oliver1850]

Yet another reason to avoid recent Campagnolo.

[oldpotatoe]

Yet another reason to avoid recent Campagnolo.

Big sigh.......

Think 9000 rear ders are the same gig...

http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/RD/EV-RD-9070-3442_v1_m56577569830818665.pdf