FS: Tune rear hub - Campy, mango, 32H

[FastforaSlowGuy]

Another bit from a project that never materialized. Here's the rub: a meathead mechanic (me) tapped the drive side axel a bit too much when removing the freehub, and tapped the bit the dropout sits on so that it went into the axel sleeve (see pic). The axel is threaded on the inside, so someone with the right tools or basic mechanical ingenuity could probably pull it back out. If you can, it's a cheap way to get an awesome hub. Bearings are smooth. Finish is clean. Yes it's mango/orange not gold.

$70 shipped.

http://img.tapatalk.com/d/13/10/07/zapy3u2u.jpg

http://img.tapatalk.com/d/13/10/07/4evadesu.jpg

http://img.tapatalk.com/d/13/10/07/6a9yzyza.jpg


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m/)

[FastforaSlowGuy]

^^^

[binouye]

To clarify, are these the hubs that appeared here on the Forum last spring? Which won't take a Campy 11-speed cassette, just 9/10 speed?

[tuscanyswe]

I believe so. I bought the other one. And if so its only 9/10. FYI It also takes a 26mm lockring and not the current 27mm