Enve road disc fork

[jpw]

http://www.enve.com/forks/road-disc.aspx

who is building frames for this fork, with a 1.5" tapered steerer?

[Dave B]

My cross bike had that, tapered enve disc fork.

[sitzmark]

http://www.enve.com/forks/road-disc.aspx

who is building frames for this fork, with a 1.5" tapered steerer?

Parlee.

Posted to thier FB page yesterday:
Speaking of disc brakes...check out this Z-Zero at the Bike Cult Show tomorrow in Brooklyn #parleecycles #zzero

[11.4]

Crumpton

Moots

many builders are moving to 44 mm head tubes and then you have the option of that fork. It's a great fork.

[54ny77]

that fork would be awesome for a tandem.

[jpw]

My cross bike had that, tapered enve disc fork.

which builder was that?

[eBAUMANN]

http://www.enve.com/forks/road-disc.aspx

who is building frames for this fork, with a 1.5" tapered steerer?

any custom builder, just ask for it! :)

[Dave B]

which builder was that?

IF of course

[Pegoready]

Anyone who offers a 44 mm head tube, which is almost everyone. Just use a Chris King Inset 7, amongst others.

[bicycletricycle]

most builders will gladly put a huge ugly head tube on your bike if requested.

[alexstar]

Paul Sadoff/Rock Lobster built me a mountain bike with a 44mm Paragon headtube. I know he has done cross bikes with it too.

[jonbek]

My Hunter has that same fork and the 1 1/8 to 1 1/2 tapered head tube as well. Built last August.

[timto]

There is also the salsa colossal steel and ti bikes that come with these
Forks. 28mm clearance. The colossal steel I've seen are nifty with all the new gizmos like big ht / bb and disc but lack any braze on for fenders not even the rear seat stay bridge. Cheap too I think $1200 for the frame with the enve disc painted to match in steel

[oldpotatoe]

http://www.enve.com/forks/road-disc.aspx

who is building frames for this fork, with a 1.5" tapered steerer?

Moots for one, Cross frames, RSL cross frame.