PDA

View Full Version : Found - Merlin HT Barrel Adjuster


rbtmcardle
02-18-2013, 09:03 AM
I recently sold a frame to a forum member and a barrel adjuster was lost during shipping, if anyone has a pair or one they are not in need of please let me know.

It is a 1999 Merlin Extralight with a HT mounted cable stop.. these were threaded with a small nut that slid into a receiver on the frame.

thanks
bob

AngryScientist
02-18-2013, 09:06 AM
if you dont have any luck here Bob, David Kirk may be able to help you out, i think he produced/sold those for a while...

jds108
02-18-2013, 11:02 AM
My '98 Extralight is probably the same as your frame. It just uses a standard M5 threaded adjusted and a standard nut. So you don't need a unique Merlin part.

I think the piece that Dave was making is/was M6 thread, but my memory could be mistaken.

dave thompson
02-18-2013, 11:41 AM
My '98 Extralight is probably the same as your frame. It just uses a standard M5 threaded adjusted and a standard nut. So you don't need a unique Merlin part.

I think the piece that Dave was making is/was M6 thread, but my memory could be mistaken.

Dave Kirk offers both M5 & M6 adjusters.

rbtmcardle
02-18-2013, 11:59 AM
Thanks all, I will contact Dave... they appeared to be 5mm..

druptight
02-18-2013, 12:10 PM
Or you can get them through Paragon:

http://www.paragonmachineworks.com/cgi-bin/commerce.cgi?preadd=action&key=CS1013